Summary:
A scrollbar will show if the entered text fills more than 1/3rd
of the screen, pressing enter will send the message and shift +
enter will add a new line.
Reviewers: #kde_connect, sredman
Reviewed By: #kde_connect, sredman
Subscribers: sredman, kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D17224
Summary:
Whenever a ConversationMessage was constructed, a warning was printed saying "Both point size and pixel size set. Using pixel size." Stop double-setting the font size and the warnings stop
This may be system-specific because I don't see where we are setting the font's point size. I will test this on a few different systems (I haven't yet) and I hope others will test it on their system!
Note that this is easiest to test when applied on top of D15979 so you can scroll up to cause more messages to be constructed
Test Plan:
Before patch: Experience many warnings when using the SMS app
After patch: Experience fewer (0?) warnings when using the SMS app
Reviewers: #kde_connect, apol
Reviewed By: #kde_connect, apol
Subscribers: kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D16769
Summary: Move ColumnLayout containing text elements inside of the graphical bounding rectangle
Test Plan:
Pre patch:
- Launch messaging app
- Open conversation
- Notice huge spew of warnings like: "qrc:/qml/ChatMessage.qml:84:5: QML ColumnLayout: Detected anchors on an item that is managed by a layout. This is undefined behavior; use Layout.alignment instead."
Post patch:
- Launch messaging app
- Open conversation
- No warnings about undefined behavior
Reviewers: apol
Reviewed By: apol
Subscribers: kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D16534
Summary:
Move the "No devices available" text in smsapp from combobox to the ConversationList.
P.S.
It's a GCI task.
Test Plan:
* Build and run smsapp
* Try pairing and unpairing the device
* See the difference
Reviewers: #kde_connect, sredman
Reviewed By: #kde_connect, sredman
Subscribers: sredman, kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D16467
Summary:
Showing the number next to the name is neither pretty nor necessary IMHO.
My Android SMS app displays the number more subtle in an extra line below in gray. I could get behind something similar, but until this is implemented just don't show it
Depends on D16015
Reviewers: #kde_connect, sredman
Reviewed By: #kde_connect, sredman
Subscribers: sredman, kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D16017
Summary: Don't ask my why this works this way
Test Plan: I see Name: phonenumber for contacts and just phonenumber for non-contacts now
Reviewers: #kde_connect, sredman
Reviewed By: #kde_connect, sredman
Subscribers: sredman, kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D16015
Summary:
When a new message is delivered, the conversation list should update by changing the preview text and re-sorting the conversations
Bonus bug discovered and fixed: previously, when the conversations list was being populated, it made a request for the first message in every conversation. This would be fine if the conversationdbusinterface pulled from local cache. However, this actually triggers a request to the phone for *every* conversation.
This should be handled differently in conversationdbusinterface's requestConversation as well, but that's a project for a later day (TODO comments added)
Test Plan:
- Launch SMS app
- Verify conversations list appears
- Verify lack of massive stream of debug output indicating lots of messages for the wrong conversation are being received
- Verify that opening a particular conversation shows the messages after a short delay while the backend fetches the content from the phone
- Verify that receiving a new message into an existing conversation updates the conversation list
Reviewers: #kde_connect, nicolasfella
Reviewed By: #kde_connect, nicolasfella
Subscribers: nicolasfella, apol, kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D15608
Summary: Improve contact matching by checking if the requested address ends with a candidate phone number, or vice-versa
Test Plan:
Check that *all* conversations which correspond to a contact are matched
- All of mine match. If someone finds one which doesn't, I will need the particulars...
Reviewers: #kde_connect, nicolasfella
Reviewed By: #kde_connect, nicolasfella
Subscribers: nicolasfella, kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D15992
Summary: Braces to start a method are on a newline, braces to begin an in-method block are on the same line
Test Plan: Pure source code cosmetic changes. Hopefully no functionality has changed!
Reviewers: #kde_connect, nicolasfella
Reviewed By: #kde_connect, nicolasfella
Subscribers: apol, nicolasfella, kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D15978
Summary:
Update sms app model to use new conversationUpdated signal
Filter incoming messages which belong to a different conversation than the one currently being viewed
See Android-side diff D15360 which adds support for sending live updates when a new message is sent or received
Test Plan:
This patch relies on D15360 for Android-side support
- Positive case:
- Open a conversation in the SMS app
- Receive a new message into that conversation (text yourself?)
- Verify that the new message appears at the bottom of the appropriate conversation
- Negative case:
- Open a conversation in the SMS app
- Receive a new message into a different conversation (text yourself?)
- Verify that the new message does *not* appear in the open conversation
Reviewers: #kde_connect, nicolasfella
Reviewed By: #kde_connect, nicolasfella
Subscribers: nicolasfella, kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D15409
Summary: Set the currentIndex of the ConversationDisplay to show the newest messages by default, but stay where the user positioned it if viewing older messages
Test Plan:
Launch SMS App:
- Select conversation
- View should show the most recent messages
- Receive new message
- View should scroll to show the new message
- Scroll up to view older messages
- Receive new message
- View should continue to show older messages and not scroll to the bottom
Reviewers: nicolasfella
Reviewed By: nicolasfella
Subscribers: nicolasfella, kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D15562
Summary: QSortFilterProxyModel filters based on a regex. When the user inserts regex special characters things go bad.
Reviewers: #kde_connect, apol
Reviewed By: #kde_connect, apol
Subscribers: apol, broulik, kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D14642
Summary: Like every messaging app I know does
Test Plan: Compare message order with phone
Reviewers: #kde_connect, sredman
Reviewed By: #kde_connect, sredman
Subscribers: sredman, kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D14638
Summary:
For real usecases of SMS support, we will almost always need access to the message history in some way
Specifically resolve T8338
Incidentally resolve T6651 since Telephony shall no longer create a notification
Test Plan:
Setup:
- Build corresponding Android-side diff (D11698)
- Build this diff
Step 1: Does anything at all work?
- Put a breakpoint in the handleBatchMessages method of the telephony plugin, ideally after constructing a Message object
- Use DBus to poke /modules/kdeconnect/devices/<deviceID>/telephony.requestAllConversations()
- Verify that the constructed Message is one you sent or received and that it is the most recent in the corresponding conversation
Step 2: DBus
- Open the Interface org.kde.kdeconnect.device.conversations of /modules/kdeconnect/devices/<deviceId>
- Poke activeConversations and verify an empty array is returned
- Poke requestAllConversationThreads
- Poke activeConversations and verify that a list of numbers has been returned. These are conversationIds
- Use a conversationId to call getFirstFromConversation
- Verify that the returned Message object is one which you recognize
- Note that if the message is an MMS it will be blank and meaningless. Try a different conversationId. MMS support "coming soon!"
Step 3: SMS App
- Use ccmake (or similar) to set SMSAPP_ENABLE to ON
- Build the project
- Run ./bin/kdeconnect-sms
- Verify that the app shows a list of everyone you have an SMS conversation with (MMS messages are stripped out)
- If you have the Contacts plugin working, verify that most contacts have their name and photo instead of their phone number
Reviewers: #kde_connect, nicolasfella, apol
Reviewed By: #kde_connect, nicolasfella, apol
Subscribers: andyholmes, apol, nicolasfella, #kde_connect
Tags: #kde_connect
Maniphest Tasks: T8338, T6651
Differential Revision: https://phabricator.kde.org/D11854
