Summary: This allows you to share a local file on your device to a remote device running kde connect.
Reviewers: nicolasfella
Reviewed By: nicolasfella
Subscribers: kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D16552
Summary: This will allow it to be used in the plasmoid and QML app via dbus.
Reviewers: nicolasfella
Reviewed By: nicolasfella
Subscribers: kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D16551
Summary:
Use the implicit header
This makes the Add commands action show up in the top bar on desktop
Desktop
{F6375830}
Mobile
{F6375831}
Reviewers: #kde_connect, apol
Reviewed By: #kde_connect, apol
Subscribers: kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D16548
Summary: Move ColumnLayout containing text elements inside of the graphical bounding rectangle
Test Plan:
Pre patch:
- Launch messaging app
- Open conversation
- Notice huge spew of warnings like: "qrc:/qml/ChatMessage.qml:84:5: QML ColumnLayout: Detected anchors on an item that is managed by a layout. This is undefined behavior; use Layout.alignment instead."
Post patch:
- Launch messaging app
- Open conversation
- No warnings about undefined behavior
Reviewers: apol
Reviewed By: apol
Subscribers: kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D16534
Summary: This patch adds a button to the plasmoid to allow adding commands by opening the menu on the remote device.
Reviewers: #vdg, nicolasfella, albertvaka
Reviewed By: nicolasfella
Subscribers: kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D16535
Summary: I am open to discussion for whether this is desireable. The use-case is for moving NetworkPacket receive handling to a thread other than the one handling the rest of the device. In order to do this, we need to use a QtConnectionType::QueuedConnection. In order for that to work (with NetworkPackets), NetworkPacket has to be registered in the Metatype system.
Test Plan: Nothing should be functionally different from before
Reviewers: #kde_connect, albertvaka
Reviewed By: #kde_connect, albertvaka
Subscribers: albertvaka, apol, nicolasfella, kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D16469
Summary: This is not a hugely important change. I noticed it while I was working on something else, and it seems like it ought to be this way
Test Plan: Nothing should be noticeably different
Reviewers: #kde_connect, albertvaka
Reviewed By: #kde_connect, albertvaka
Subscribers: apol, kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D16468
Summary:
Move the "No devices available" text in smsapp from combobox to the ConversationList.
P.S.
It's a GCI task.
Test Plan:
* Build and run smsapp
* Try pairing and unpairing the device
* See the difference
Reviewers: #kde_connect, sredman
Reviewed By: #kde_connect, sredman
Subscribers: sredman, kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D16467
Summary:
Some plugins were copy/pasted from a template and forgot to change their include guards. Since plugin header files are never cross-referenced, this was not a serious issue, but it looks nicer to be correct
NotificationListener.h did not have an include guard. As before, this is not a problem currently, but it's best to have it fixed
Test Plan: Project should build, compile, and run as normal
Reviewers: #kde_connect, nicolasfella
Reviewed By: #kde_connect, nicolasfella
Subscribers: kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D16437
Summary:
Main change is to use libkeepalive to wake up the system to ensure connections stay alive
Other minor changes are:
-Log daemon messages for debugging purposes
-Add way to forece refresh of device list
-Minor spec improvements
The keepalive changes certainly seem to help, not sure if it completely solves the problems
The logging changes are temporary, and I could use them locally, but they only affect sailfish users
Im not sure if the refresh method is correct, but seems to force the daemon to check for devices
Reviewers: #kde_connect, nicolasfella, albertvaka
Reviewed By: #kde_connect, albertvaka
Subscribers: kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D15414
Summary: A drawer is not good UX on the desktop. Only collapse it when on mobile or window is very narrow
Test Plan:
{F6319485}
{F6319492}
Reviewers: #kde_connect, albertvaka
Reviewed By: #kde_connect, albertvaka
Subscribers: albertvaka, kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D16122
Summary:
Showing the number next to the name is neither pretty nor necessary IMHO.
My Android SMS app displays the number more subtle in an extra line below in gray. I could get behind something similar, but until this is implemented just don't show it
Depends on D16015
Reviewers: #kde_connect, sredman
Reviewed By: #kde_connect, sredman
Subscribers: sredman, kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D16017
Summary: Don't ask my why this works this way
Test Plan: I see Name: phonenumber for contacts and just phonenumber for non-contacts now
Reviewers: #kde_connect, sredman
Reviewed By: #kde_connect, sredman
Subscribers: sredman, kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D16015
Summary:
When a new message is delivered, the conversation list should update by changing the preview text and re-sorting the conversations
Bonus bug discovered and fixed: previously, when the conversations list was being populated, it made a request for the first message in every conversation. This would be fine if the conversationdbusinterface pulled from local cache. However, this actually triggers a request to the phone for *every* conversation.
This should be handled differently in conversationdbusinterface's requestConversation as well, but that's a project for a later day (TODO comments added)
Test Plan:
- Launch SMS app
- Verify conversations list appears
- Verify lack of massive stream of debug output indicating lots of messages for the wrong conversation are being received
- Verify that opening a particular conversation shows the messages after a short delay while the backend fetches the content from the phone
- Verify that receiving a new message into an existing conversation updates the conversation list
Reviewers: #kde_connect, nicolasfella
Reviewed By: #kde_connect, nicolasfella
Subscribers: nicolasfella, apol, kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D15608
Summary: Improve contact matching by checking if the requested address ends with a candidate phone number, or vice-versa
Test Plan:
Check that *all* conversations which correspond to a contact are matched
- All of mine match. If someone finds one which doesn't, I will need the particulars...
Reviewers: #kde_connect, nicolasfella
Reviewed By: #kde_connect, nicolasfella
Subscribers: nicolasfella, kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D15992
Summary: Braces to start a method are on a newline, braces to begin an in-method block are on the same line
Test Plan: Pure source code cosmetic changes. Hopefully no functionality has changed!
Reviewers: #kde_connect, nicolasfella
Reviewed By: #kde_connect, nicolasfella
Subscribers: apol, nicolasfella, kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D15978
Summary:
This fixes receiving payloads using the bluetooth backend.
This looks like some bug in Qt, but I couldn't figure out what happens exactly (will report a bug though).
Test Plan: Receiving files now works!
Reviewers: #kde_connect, apol
Reviewed By: #kde_connect, apol
Subscribers: kdeconnect, nicolasfella, apol, #kde_connect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D12153
Summary:
Bug: 399115
When using kdeconnect-cli --share the first argument was not recognised as a file when a relative path was specified.
Test Plan:
kdeconnect-cli --share File1.txt File2.txt : Check that both files are sent
kdeconnect-cli --sahre phabricator.kde.org : Check that web page is opend
Reviewers: #kde_connect, apol
Reviewed By: #kde_connect, apol
Subscribers: apol, kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D15787
Summary: If there was any reason to have it split please enlighten me
Test Plan: Remove icons from hicolor folder. sudo make install. Check for installed icons
Reviewers: #kde_connect, apol
Reviewed By: #kde_connect, apol
Subscribers: kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D15765
Summary: You should be ableto unpair unreachable devices with the CLI
Reviewers: kdeconnect, albertvaka
Reviewed By: albertvaka
Subscribers: albertvaka
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D15677
Summary:
Update sms app model to use new conversationUpdated signal
Filter incoming messages which belong to a different conversation than the one currently being viewed
See Android-side diff D15360 which adds support for sending live updates when a new message is sent or received
Test Plan:
This patch relies on D15360 for Android-side support
- Positive case:
- Open a conversation in the SMS app
- Receive a new message into that conversation (text yourself?)
- Verify that the new message appears at the bottom of the appropriate conversation
- Negative case:
- Open a conversation in the SMS app
- Receive a new message into a different conversation (text yourself?)
- Verify that the new message does *not* appear in the open conversation
Reviewers: #kde_connect, nicolasfella
Reviewed By: #kde_connect, nicolasfella
Subscribers: nicolasfella, kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D15409
Summary:
Drop support for creating notifications from the SMS plugin. The old usecase is better handled by the notifications plugin reply box anyway
Rename packets defined in SMS plugin from PACKET_TYPE_TELEPHONY_* to PACKET_TYPE_SMS_*
Update TELEPHONY plugin packet description to point to SMS plugin
Define TELEPHONY_REQUEST_MUTE packet to replace old TELEPHONY_REQUEST with mute event field
Please see Android-side patch here: D15544
Test Plan:
I see four test cases, based on the version of the app being used, where "old" means any version built with sources not containing this revision and "new" means any version built with sources using this revision:
- New Android vs. New Desktop
- Supported and works for me
- New Android vs. Old Desktop
- Supported and works for me
- Old Android vs. New Desktop
- Not supported - Download a new app from the Play store or F-Droid
- Old Android vs. Old Desktop
- If this is broken, it is not my fault :)
In the supported use cases:
- Test SMS reply
- Receive SMS (or MMS!) message
- Verify that the //notification// plugin forwards a replyable notification and that replying works
- Test incoming call ringer mute
- Enable ringer volume (not vibrate)
- Receive phone call
- Verify a desktop notification with a Mute button appears
- Verify that clicking the mute button causes the phone to stop making the ringer noise (vibration not affected)
Reviewers: #kde_connect, albertvaka, nicolasfella
Reviewed By: #kde_connect, albertvaka, nicolasfella
Subscribers: nicolasfella, kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D15543
Summary: Set the currentIndex of the ConversationDisplay to show the newest messages by default, but stay where the user positioned it if viewing older messages
Test Plan:
Launch SMS App:
- Select conversation
- View should show the most recent messages
- Receive new message
- View should scroll to show the new message
- Scroll up to view older messages
- Receive new message
- View should continue to show older messages and not scroll to the bottom
Reviewers: nicolasfella
Reviewed By: nicolasfella
Subscribers: nicolasfella, kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D15562
