Summary:
Combine multiple upload jobs for files into a single KCompositeJob so only 1 notification will be shown
Includes changes introduced in D16279
Test Plan:
1. Share of multiple files is performed using 1 composite job
Setup:
- Select multiple (big) files in dolphin and share with an Android device
Result:
- The files will be transferred using 1 CompositeUploadJob and showing only 1 notification
2. Share of file while another share is already running adds job to existing composite job
Setup:
- Select multiple (big) files in dolphin and share with an Android device
- Share an additional file with the same Android device
Result:
- The files are all transferred using 1 CompositeUploadJob and showing only 1 notification
- The notification is updated after adding the last file
3. Other packets are transmitted as usual
Setup:
- Setup sharing desktop notification with device
- Share a big file with an Android device
- Generate a desktop notification (eg. sending or receiving an email)
Result:
- Notification packet is send immediately
Reviewers: #kde_connect, nicolasfella, albertvaka
Reviewed By: #kde_connect, albertvaka
Subscribers: albertvaka, apol, nicolasfella, broulik, kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D17081
Summary:
Show progress when sending a file from the desktop
BUG: 355044
Test Plan:
Complete transfer:
-Right click on a big file in dolphin
-Select Send to xx via KDE Connect
-Open the Notifications widget and verify progress is shown correctly
Stop transfer:
-Right click on a big file in dolphin
-Select Send to xx via KDE Connect
-Open The Notifications widget and press the stop/kill button
-Observe that the file upload is stopped
Reviewers: #kde_connect, nicolasfella
Reviewed By: #kde_connect, nicolasfella
Subscribers: apol, broulik, nicolasfella, kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D16279
Summary:
No need to emit newConnection in Server::incomingConnection because QTcpServer will emit it after incomingConnection returns
QTcpServer also already has a list of pending connections so use that
Test Plan: Send a file from desktop to android and observe that newConnection is only called once
Reviewers: #kde_connect, albertvaka
Reviewed By: #kde_connect, albertvaka
Subscribers: kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D17009
Summary: Why cast sender() to server when we have m_server
Reviewers: #kde_connect, apol
Reviewed By: #kde_connect, apol
Subscribers: kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D16760
Summary: If the number of bytes received != m_size report failure and delete the partial file
Reviewers: #kde_connect, albertvaka
Reviewed By: #kde_connect, albertvaka
Subscribers: kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D16778
Summary: I am open to discussion for whether this is desireable. The use-case is for moving NetworkPacket receive handling to a thread other than the one handling the rest of the device. In order to do this, we need to use a QtConnectionType::QueuedConnection. In order for that to work (with NetworkPackets), NetworkPacket has to be registered in the Metatype system.
Test Plan: Nothing should be functionally different from before
Reviewers: #kde_connect, albertvaka
Reviewed By: #kde_connect, albertvaka
Subscribers: albertvaka, apol, nicolasfella, kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D16469
Summary: This is not a hugely important change. I noticed it while I was working on something else, and it seems like it ought to be this way
Test Plan: Nothing should be noticeably different
Reviewers: #kde_connect, albertvaka
Reviewed By: #kde_connect, albertvaka
Subscribers: apol, kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D16468
Summary:
Main change is to use libkeepalive to wake up the system to ensure connections stay alive
Other minor changes are:
-Log daemon messages for debugging purposes
-Add way to forece refresh of device list
-Minor spec improvements
The keepalive changes certainly seem to help, not sure if it completely solves the problems
The logging changes are temporary, and I could use them locally, but they only affect sailfish users
Im not sure if the refresh method is correct, but seems to force the daemon to check for devices
Reviewers: #kde_connect, nicolasfella, albertvaka
Reviewed By: #kde_connect, albertvaka
Subscribers: kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D15414
Summary:
This fixes receiving payloads using the bluetooth backend.
This looks like some bug in Qt, but I couldn't figure out what happens exactly (will report a bug though).
Test Plan: Receiving files now works!
Reviewers: #kde_connect, apol
Reviewed By: #kde_connect, apol
Subscribers: kdeconnect, nicolasfella, apol, #kde_connect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D12153
Summary:
It doesn't do much and can be inlined into LanDeviceLink.
TODO: Figure out why sendfiletest fails
Test Plan: Receiving files still works
Reviewers: #kde_connect, albertvaka
Reviewed By: #kde_connect, albertvaka
Subscribers: albertvaka, kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D14597
Summary:
Show the plugin's icons in the list
Depends on D14567
{F6172885}
Reviewers: #kde_connect, apol
Reviewed By: #kde_connect, apol
Subscribers: kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D14571
Summary:
Below is a lost of the commits, but, in summary
Port the build system for Sailfish, which means selectively building only the bits we need/can, and only against the KF5 libs that are available.
Allow to build on Qt 5.6
Switch from knotification to nemo notification (not complete!)
Add a very simple example sailfish app.
Note, there is still much missing functionality. Notifications dont work, pairing sort of works but not really, but when it is paired you can send a ping to the desktop client
Dont build kio for Sailfish
Port core build system
Port daemon buld system
Require CoreAddons on Sailfish
Port plugins build for sailfish and include the ping plugin for now
Final build changes for sailfish.
Disable tests and other not needed parts
Add includes for QCA
Fix build errors on sailfish
Get core/ to build on sailfish
Get interfaces/ to build on sailfish
Build daemon on sailfish
On sailfish, dont install the kcm file
Start port plugin to sailfish
Fixup installed files
Add sfos app
Hack declarative plugin to give a public interface
Build sfos app
Compile declarativeplugin into the sfos app for now
Redefine qAsConst for qt 5.6
Packaging fixes
Use official icon
Package .desktop
Reviewers: #kde_connect, apol, nicolasfella, albertvaka
Reviewed By: #kde_connect, apol, nicolasfella, albertvaka
Subscribers: kdeconnect, andyholmes, albertvaka, kossebau, mtijink, vonreth, apol, #kde_connect, nicolasfella
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D10703
Summary:
Musl lacks backtrace support, so this patch fixes the build by making sure it only gets compiled when using a glibc system.
Bug: 395161
Reviewers: #kde_connect
Subscribers: kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D13446
Summary: Sharing files to the Android bluetooth backend now works. The code is asynchronous now too.
Test Plan: I tested several files, and they all get transferred correctly. The socket gets destroyed correctly too.
Reviewers: #kde_connect, apol
Reviewed By: #kde_connect, apol
Subscribers: apol, #kde_connect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D12264
Summary:
Add a helper function to the daemon interface, which must be subclassed
by the implementations, which creates a simple notification.
For more complex needs, involving interacting with the notification, it
will still be nescessary to use KNotification directly, but this allows
for other future implementations to create a simple notification without
ifdef'ing the code.
Reviewers: kdeconnect, apol
Reviewed By: apol
Subscribers: kdeconnect
Differential Revision: https://phabricator.kde.org/D11104
Summary:
* cmake 2.8.12 is really outdated, 3.0 is minimum in plasma & kf5
* cmake_minimum_required should be at begin of toplevel CMakeLists.txt
* bump qt version to 5.7, matching the min Qt version of kf5 5.42
* with ecm being part of kf5 since early versions, share ${KF5_MIN_VERSION}
* use QT_MIN_VERSION & KF5_MIN_VERSION also for separate find_package calls
* deduplicate all KF5 components searched for in unconditionally included
subdirs
Test Plan: Still configures and builds with all options OFF & ON
Reviewers: #kde_connect, nicolasfella
Reviewed By: #kde_connect, nicolasfella
Subscribers: nicolasfella
Differential Revision: https://phabricator.kde.org/D11418
Summary: KDE Connect, now with correct naming!
Test Plan: It still builds.
Reviewers: #kde_connect, apol, nicolasfella
Reviewed By: #kde_connect, apol, nicolasfella
Subscribers: nicolasfella
Differential Revision: https://phabricator.kde.org/D11036
Summary: A variable was not renamed correctly because nobody tested it with Bluetooth enabled
Test Plan: compiles
Reviewers: #kde_connect, albertvaka
Reviewed By: #kde_connect, albertvaka
Subscribers: albertvaka, #kde_connect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D7777
Summary:
Change all member variables to the form m_fooBar because it is the preferred form in Qt (it was half and half between this and mFooBar, and a minority didn't have anything).
Place all references and pointers on the side of the type since it is the majority.
Basically:
- mFoo -> m_foo
- foo -> m_foo (if it is a member variable)
- Type &ref -> Type& ref
- Type *ptr -> Type* ptr
Reviewers: #kde_connect, nicolasfella, albertvaka
Reviewed By: #kde_connect, nicolasfella, albertvaka
Subscribers: albertvaka, #kde_connect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D7312
We stop using a buffer so it's less memory intensive and allows for larger files to be sent.
With current KIO has CPU usage issues, there's a patch in review that fixes them.
BUGS: 378488
Summary:
QSslSocket is already a QIODevice so just use that.
Should fix the issue of transfering *big* files.
Unfortunately this seems to trigger a bug in KIO and CPU usage goes through the roof, so haven't really been able to test it does actually fix things.
Please don't merge/approve yet
Reviewers: apol, albertvaka, kdeconnect
Subscribers: #kde_connect
Differential Revision: https://phabricator.kde.org/D6039
Summary:
There is currently an issue where the device doesn't send the correct IP address for sshfs when a VPN is present.
Instead of asking the device to find and send its address, we can store it from when the device link is created then reuse it.
Test Plan:
All unit tests pass.
In these different situations:
- without a VPN
- with a VPN running
- with a VPN started then stopped (the tun interface might still be there)
Try to remotely browse the device. It should work in all cases.
Reviewers: #kde_connect, albertvaka
Reviewed By: #kde_connect, albertvaka
Subscribers: albertvaka, apol, nicolasfella, sredman
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D6730
Summary:
The use of Q_FOREACH is advised against (https://doc.qt.io/qt-5/qtglobal.html#Q_FOREACH) since Qt 5.7 and will eventually be removed from Qt.
I replaced all occurrences with the range-for loop introduced in C++11 (except for the one in daemon.cpp in deviceIdByName which might have a bug / typo in it).
I added const to the container or casted it with qAsConst when appropriate to avoid unnecessary copies.
(This is my first submission. I did all the unit tests, and they all passed but I don't know how to show it here.)
Reviewers: #kde_connect, nicolasfella, apol
Reviewed By: #kde_connect, nicolasfella, apol
Subscribers: albertvaka, apol, nicolasfella
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D6724
If we're ignoring an ssl issue, at least show it.
On connected show whether the socket is valid, otherwise we get remote
devices disconnected without any message. (In this case HostNameMismatch)
Also fixes a typo
CCBUG: 381542
KDE Connect runs, and the bluetooth service gets published in the SDP
(service discovery protocol), which other devices use to determine what
services are available.
The getPairedDevices() method in the link provider class uses D-Bus to get
the list of paired devices, since Qt doesn't have a method giving that
information. As a result, that part of the code only works on Linux.
REVIEW: 122174
- FileTransferJob is now nonblocking.
- Files are stored based on the image MD5.
- Some improvements in displaying the notification, e.g. title is only
displayed when different than the app name.
- Most of the notification display code moved to the Notification class.
REVIEW: 130050
Summary:
Don't use QDBusConnection::ExportAllContents
No need to make connect and receivedPackage public slots (they're are the
parent's already)
Fixes T4975
Test Plan: Rough manual test
Reviewers: #kde_connect, albertvaka
Reviewed By: #kde_connect, albertvaka
Maniphest Tasks: T4975
Differential Revision: https://phabricator.kde.org/D3871
Notifications are not persistent, and once gone there is no
way to accept the request. Clicking the notification in the
notification history does nothing in plasma and gnome.
There make them persistent and close them after the pairing timeout,
after which they are no longer useful.
BUG: https://phabricator.kde.org/T5002
We use it to display the state and we're providing them as fallback,
they will always be available.
Otherwise, on some platform this clashes with the icon engine falling
back to less specific version of the icon (i.e. smartphone instead of
smartphone-connected).
https://specifications.freedesktop.org/icon-naming-spec/icon-naming-spec-latest.html
Reviewed by Albert Vaca
When sending multiple files from my phone to my PC, kdeconnectd usually received a SIGFPE.
To get the transfer speed it divides the number of bytes received by the elapsed time which can be zero.
Also, since we're only interested in the time that has elapsed, use QElapsedTimer,
which is exactly for this. QTime::elapsed() also needs to take into account potentially
ocurred timezone or DST changes.
REVIEW: 128861
Makes it possible to display it and modify it
Introduces a DBusProperty component that can be used if we don't want
to go through the QtDBus property generation hell.
If both devices are in "discovery mode" (ie: both want to keep links
established) and the last one to create the link goes out of discovery
mode, it will close the link when it shouldn't (because the other end still
was "using" it to display it to the user).
As discussed with Albert, move the population of capabilities into the
identity package, making them static along the execution of the link.
When we receive the identityPackage, we collect the plugins we can use with
the device and stick to those. This should simplify the implementation and
remove the possibility to lose packages if packages are received before the
capabilities are processed in the former approach.
REVIEW: 128386
Introduces a big fat buffer :(
Actually test the trasfers :)
Takes QSslSocket causistic into account, for some reason QNAM refuses to
mark as finished when the QSslSocket (through QIODevice) closes.
It would be good to look into dropping the QBuffer, doing so with the test
in place will help.
Makes it possible to specify the different properties sent at once,
rather than one by one as we used to do.
Also port whenever possible to the initializer-list syntax.
REVIEW: 128269
Added kcm ui with global and app-specific config options.
Global options affect all notifications:
- Persistent only? --> Sync only notifications with timeout == 0?
- Include body? --> Add body string to summary when syncing?
- Minimum urgency
Per-application options affect notifications sent by a specific
application:
- Sync it at all?
- If yes, allow to define a "blacklist" pattern (QRegularExpression)
to define which notifications should *not* be synced.
Applications are maintained in the per-device config and added when
seen the first time by the notification listener. From that moment on
they can be configured in the kcm ui.
There are still some code paths where it doesn't get destroyed though,
like when the device gets unreachable (and the download socket doesn't
close for some reason).
At the moment, we were keeping the connection alive with every reachable
device. While this works optimally for most use-cases, on networks with
several devices with KDE Connect, the amount of connections grows
exponentially.
Reviewed by Albert Vaca
CCBUG: 352424
Every time we reload the plugin list, report the plugins that we support.
If the remote devices' capabilities change, update the plugin list.
Reviewed by Albert Vaca
