## Summary
LanLinkProviderTest fails on Windows. This patch fixes that.
I believe the root cause is that we are using a shared UDP socket to listen for identity broadcasts both in the LanLinkProvider and in the test. Apparently this works on Linux, but on Windows the LanLinkProvider picks up its own identity packet and pairs with itself.
This patch gives a parameter to LanLinkProvider to allow it to listen and broadcast on different ports, then uses that ability in the test to make the test pass on Windows.
## Test Plan
### Before:
lanlinkprovider test fails, first because it can't bind its UDP listener socket, and then because Windows seems to handle shared sockets differently than Linux, so the UDP broadcasts were not reaching the test's listener.
### After:
lanlinkprovider test seems to pass reliably both in my Windows VM and in the CI
Summary:
As mentioned on telegram, there are some fundamental issues with bluetooth. The only approach I could get working was multiplexing: manually sending multiple streams of data over a single connection.
This is the description of that multiplexing protocol. I have an implementation of this protocol, but I'd first like some feedback to see if this is what we're going to use before finishing up those patches.
See the document itself for more details. I make the protocol forward-compatible, although I don't expect we will need ever that.
Test Plan: None, this is just a description.
Reviewers: #kde_connect, andyholmes, albertvaka
Reviewed By: #kde_connect, albertvaka
Subscribers: albertvaka, kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D17987
Summary:
When android closes the payload socket (cancel share) calling m_socket.close() results
in a recursive call to onError eventually leading to a segmentation violation
Test Plan:
Install D16491, share a large file from desktop to android and cancel the share on Android through
the notification. kdeconnectd crashes almost 100% of the time. (It doesn't crash when it detects
a disconnect in sendNextPacket)
Reviewers: #kde_connect, nicolasfella
Reviewed By: #kde_connect, nicolasfella
Subscribers: kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D17628
Summary: If the identity packet is split across two packets, then save it until we get a notification that more data is available for reading over the bluetooth link.
Test Plan: Connect a phone and laptop over Bluetooth, and verify that both the phone and laptop are able to see each other, and that either side can start and successfully go through the pairing process.
Reviewers: #kde_connect, mtijink
Reviewed By: #kde_connect, mtijink
Subscribers: mtijink, kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D17789
Summary:
Combine multiple upload jobs for files into a single KCompositeJob so only 1 notification will be shown
Includes changes introduced in D16279
Test Plan:
1. Share of multiple files is performed using 1 composite job
Setup:
- Select multiple (big) files in dolphin and share with an Android device
Result:
- The files will be transferred using 1 CompositeUploadJob and showing only 1 notification
2. Share of file while another share is already running adds job to existing composite job
Setup:
- Select multiple (big) files in dolphin and share with an Android device
- Share an additional file with the same Android device
Result:
- The files are all transferred using 1 CompositeUploadJob and showing only 1 notification
- The notification is updated after adding the last file
3. Other packets are transmitted as usual
Setup:
- Setup sharing desktop notification with device
- Share a big file with an Android device
- Generate a desktop notification (eg. sending or receiving an email)
Result:
- Notification packet is send immediately
Reviewers: #kde_connect, nicolasfella, albertvaka
Reviewed By: #kde_connect, albertvaka
Subscribers: albertvaka, apol, nicolasfella, broulik, kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D17081
Summary:
Show progress when sending a file from the desktop
BUG: 355044
Test Plan:
Complete transfer:
-Right click on a big file in dolphin
-Select Send to xx via KDE Connect
-Open the Notifications widget and verify progress is shown correctly
Stop transfer:
-Right click on a big file in dolphin
-Select Send to xx via KDE Connect
-Open The Notifications widget and press the stop/kill button
-Observe that the file upload is stopped
Reviewers: #kde_connect, nicolasfella
Reviewed By: #kde_connect, nicolasfella
Subscribers: apol, broulik, nicolasfella, kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D16279
Summary:
No need to emit newConnection in Server::incomingConnection because QTcpServer will emit it after incomingConnection returns
QTcpServer also already has a list of pending connections so use that
Test Plan: Send a file from desktop to android and observe that newConnection is only called once
Reviewers: #kde_connect, albertvaka
Reviewed By: #kde_connect, albertvaka
Subscribers: kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D17009
Summary: Why cast sender() to server when we have m_server
Reviewers: #kde_connect, apol
Reviewed By: #kde_connect, apol
Subscribers: kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D16760
Summary: This is not a hugely important change. I noticed it while I was working on something else, and it seems like it ought to be this way
Test Plan: Nothing should be noticeably different
Reviewers: #kde_connect, albertvaka
Reviewed By: #kde_connect, albertvaka
Subscribers: apol, kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D16468
Summary:
Main change is to use libkeepalive to wake up the system to ensure connections stay alive
Other minor changes are:
-Log daemon messages for debugging purposes
-Add way to forece refresh of device list
-Minor spec improvements
The keepalive changes certainly seem to help, not sure if it completely solves the problems
The logging changes are temporary, and I could use them locally, but they only affect sailfish users
Im not sure if the refresh method is correct, but seems to force the daemon to check for devices
Reviewers: #kde_connect, nicolasfella, albertvaka
Reviewed By: #kde_connect, albertvaka
Subscribers: kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D15414
Summary:
This fixes receiving payloads using the bluetooth backend.
This looks like some bug in Qt, but I couldn't figure out what happens exactly (will report a bug though).
Test Plan: Receiving files now works!
Reviewers: #kde_connect, apol
Reviewed By: #kde_connect, apol
Subscribers: kdeconnect, nicolasfella, apol, #kde_connect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D12153
Summary:
It doesn't do much and can be inlined into LanDeviceLink.
TODO: Figure out why sendfiletest fails
Test Plan: Receiving files still works
Reviewers: #kde_connect, albertvaka
Reviewed By: #kde_connect, albertvaka
Subscribers: albertvaka, kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D14597
Summary:
Below is a lost of the commits, but, in summary
Port the build system for Sailfish, which means selectively building only the bits we need/can, and only against the KF5 libs that are available.
Allow to build on Qt 5.6
Switch from knotification to nemo notification (not complete!)
Add a very simple example sailfish app.
Note, there is still much missing functionality. Notifications dont work, pairing sort of works but not really, but when it is paired you can send a ping to the desktop client
Dont build kio for Sailfish
Port core build system
Port daemon buld system
Require CoreAddons on Sailfish
Port plugins build for sailfish and include the ping plugin for now
Final build changes for sailfish.
Disable tests and other not needed parts
Add includes for QCA
Fix build errors on sailfish
Get core/ to build on sailfish
Get interfaces/ to build on sailfish
Build daemon on sailfish
On sailfish, dont install the kcm file
Start port plugin to sailfish
Fixup installed files
Add sfos app
Hack declarative plugin to give a public interface
Build sfos app
Compile declarativeplugin into the sfos app for now
Redefine qAsConst for qt 5.6
Packaging fixes
Use official icon
Package .desktop
Reviewers: #kde_connect, apol, nicolasfella, albertvaka
Reviewed By: #kde_connect, apol, nicolasfella, albertvaka
Subscribers: kdeconnect, andyholmes, albertvaka, kossebau, mtijink, vonreth, apol, #kde_connect, nicolasfella
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D10703
Summary: Sharing files to the Android bluetooth backend now works. The code is asynchronous now too.
Test Plan: I tested several files, and they all get transferred correctly. The socket gets destroyed correctly too.
Reviewers: #kde_connect, apol
Reviewed By: #kde_connect, apol
Subscribers: apol, #kde_connect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D12264
Summary: KDE Connect, now with correct naming!
Test Plan: It still builds.
Reviewers: #kde_connect, apol, nicolasfella
Reviewed By: #kde_connect, apol, nicolasfella
Subscribers: nicolasfella
Differential Revision: https://phabricator.kde.org/D11036
Summary:
Change all member variables to the form m_fooBar because it is the preferred form in Qt (it was half and half between this and mFooBar, and a minority didn't have anything).
Place all references and pointers on the side of the type since it is the majority.
Basically:
- mFoo -> m_foo
- foo -> m_foo (if it is a member variable)
- Type &ref -> Type& ref
- Type *ptr -> Type* ptr
Reviewers: #kde_connect, nicolasfella, albertvaka
Reviewed By: #kde_connect, nicolasfella, albertvaka
Subscribers: albertvaka, #kde_connect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D7312
We stop using a buffer so it's less memory intensive and allows for larger files to be sent.
With current KIO has CPU usage issues, there's a patch in review that fixes them.
BUGS: 378488
Summary:
QSslSocket is already a QIODevice so just use that.
Should fix the issue of transfering *big* files.
Unfortunately this seems to trigger a bug in KIO and CPU usage goes through the roof, so haven't really been able to test it does actually fix things.
Please don't merge/approve yet
Reviewers: apol, albertvaka, kdeconnect
Subscribers: #kde_connect
Differential Revision: https://phabricator.kde.org/D6039
Summary:
There is currently an issue where the device doesn't send the correct IP address for sshfs when a VPN is present.
Instead of asking the device to find and send its address, we can store it from when the device link is created then reuse it.
Test Plan:
All unit tests pass.
In these different situations:
- without a VPN
- with a VPN running
- with a VPN started then stopped (the tun interface might still be there)
Try to remotely browse the device. It should work in all cases.
Reviewers: #kde_connect, albertvaka
Reviewed By: #kde_connect, albertvaka
Subscribers: albertvaka, apol, nicolasfella, sredman
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D6730
Summary:
The use of Q_FOREACH is advised against (https://doc.qt.io/qt-5/qtglobal.html#Q_FOREACH) since Qt 5.7 and will eventually be removed from Qt.
I replaced all occurrences with the range-for loop introduced in C++11 (except for the one in daemon.cpp in deviceIdByName which might have a bug / typo in it).
I added const to the container or casted it with qAsConst when appropriate to avoid unnecessary copies.
(This is my first submission. I did all the unit tests, and they all passed but I don't know how to show it here.)
Reviewers: #kde_connect, nicolasfella, apol
Reviewed By: #kde_connect, nicolasfella, apol
Subscribers: albertvaka, apol, nicolasfella
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D6724
If we're ignoring an ssl issue, at least show it.
On connected show whether the socket is valid, otherwise we get remote
devices disconnected without any message. (In this case HostNameMismatch)
Also fixes a typo
CCBUG: 381542
KDE Connect runs, and the bluetooth service gets published in the SDP
(service discovery protocol), which other devices use to determine what
services are available.
The getPairedDevices() method in the link provider class uses D-Bus to get
the list of paired devices, since Qt doesn't have a method giving that
information. As a result, that part of the code only works on Linux.
REVIEW: 122174
Notifications are not persistent, and once gone there is no
way to accept the request. Clicking the notification in the
notification history does nothing in plasma and gnome.
There make them persistent and close them after the pairing timeout,
after which they are no longer useful.
BUG: https://phabricator.kde.org/T5002
If both devices are in "discovery mode" (ie: both want to keep links
established) and the last one to create the link goes out of discovery
mode, it will close the link when it shouldn't (because the other end still
was "using" it to display it to the user).
Introduces a big fat buffer :(
Actually test the trasfers :)
Takes QSslSocket causistic into account, for some reason QNAM refuses to
mark as finished when the QSslSocket (through QIODevice) closes.
It would be good to look into dropping the QBuffer, doing so with the test
in place will help.
Makes it possible to specify the different properties sent at once,
rather than one by one as we used to do.
Also port whenever possible to the initializer-list syntax.
REVIEW: 128269
