This whole code was no-op: it enumerates network interfaces, enumerates
its IP addresses, but does not change the address of broadcast UDP
packet, sending it only via default route/interface.
Bind the socket to IP addresses of the interfaces to fix the issue.
BUG: 459171
This is the proper way to communicate progress.
It has Plasma show the file name in case of single files
and "n of m files" as before for multiple files.
On FreeBSD 12 or later, a new routing strategy is introduced, which
prevents broadcast using 255.255.255.255.
Thus, we need to explicitly send the broadcast to each network
interfaces.
Here the commit can simply reuse the code for Windows.
Ref: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=252596
Detect the MTU on macOS and FreeBSD (which share the network parts of FreeBSD) and adaptively remove the outgoing and incoming capabilities.
The incoming capabilities are usually shorter, fit the size and help initialize the plugin list on the peer. This should fix an empty plugin list when the identity packet is sent by the macOS app.
If the MTU is still too short, both the capabilities need to be removed, which is not likely to happen.
Add the necessary bits for XDG activation to work
Move the code for launching the settings from the daemon to the respective processes so that we don't need to pass activation tokens over another process boundary
Better patch to replace !218.
- Auto and quick detection of previous D-Bus instance;
- Remove private D-Bus compile definition, only use it on macOS without an existing D-Bus instance;
- Safe reboot after crashes because the indicator is not relating on the kdeconnectd to run a D-Bus session;
- Safe exit after clicking on `Quit` in the systray.
More details in commit logs:
Only enable private D-Bus on macOS because the other platforms do not
need them.
The app should be able to easily detect the session bus from the env
DBUS_LAUNCHD_SESSION_BUS_SOCKET from launchd through launchctl.
Because https://gitlab.freedesktop.org/dbus/dbus/-/blob/master/dbus/dbus-sysdeps-unix.c#L4392
shows that it is the only probing method on macOS with launchd.
The D-Bus session bus can be easily found from launchd/launchctl
with DBUS_LAUNCHD_SESSION_BUS_SOCKET env. It can be an external one
(installed from HomeBrew) or an internal one (launched by a previous
instance followed by a crash).
The indicator helper on macOS can now automatically detect whether we can use a potentially
(with launchd/launchctl env set, or KDE Connect macOS
private_bus_address set) existed and usable session bus.
If previous bus is usable, just try to launch the kdeconnectd with us.
Otherwise, launch a private D-Bus daemon, export the launchd/launchctl
env, and run a kdeconnectd instance.
Everything works better and quicker now :)
Consider the following scenario:
1. We send a UDP broadcast
2. We receive a reply from 192.168.0.1 with device ID "foo"
3. We connect to 192.168.0.1, and find that the device's certificate
is actually for a different ID "bar". This could be because the
packet did not actually originate from 192.168.0.1, or this host is
malicious / malfunctioning.
4. We remember that device ID "foo" has certificate with common name "bar".
5. When we finally attempt to connect to the real device ID "foo", we
reject their certificate (common name "foo"). We can now never
successfully connect to "foo".
On some network (mis-)configurations, this completely prevents
kdeconnectd from connecting to any peers, because a reply which is
seen as originating from the local interface address will cause
kdeconnectd to immediately connect to itself and remember its own
certificate.
Address this by using the certificate display name of the peer, which
will match the real device ID.
The `QElapsedTimer` was never started. Clean it up somewhat and use a dedicated
250ms timer for reporting transferred bytes periodically (like KIO does it) and
1000ms for calculating speed so it's not as erratic.
Furthermore, report final numbers in `slotResult` rather than complicating
`slotProcessedAmount` for that.
Also, fix typo "send" -> "sent"
* Set magic `destUrl` property to let it know the job destination in case of
multiple files being transferred
* Set a normal "Receiving File(s)" title like we do with "Copying" title
* Set device name and destination path as details
The key is a sha256 of both devices' certificates. Both should generate the
same key, so hey user can check they are pairing against the right device.
Thanks Matthias Gerstner <mgerstner@suse.de> for reporting this.
We have a few places that open the KCM, with different arguments.
Centralize the implementation in one place.
This makes it easier to switch to invoking systemsettings5 in the future (once https://invent.kde.org/plasma/systemsettings/-/merge_requests/11 is in).
It also makes sure the relevant device is selected when clicking on a pairing notification.
The function is exposed to DBus for the Plasmoid and potential third-party users.
CCBUG: 425660
The package will arrive eventually, and dataReceived will be emitted.
Otherwise we just end up calling dataReceived to no end.
Thanks Matthias Gerstner <mgerstner@suse.de> for reporting this.
Healthy identity packages shouldn't be that big and we don't want to
allow systems around us to send us ever humongous packages that will
just leave us without any memory.
Thanks Matthias Gerstner <mgerstner@suse.de> for reporting this.
We use kdeconnect-version.h in several places and therefore it needs to be in the include path. We currently do this by setting target_include_path in a few places. Replace this with an interface library that we can link against that sets up the correct include path. IMO it is cleaner this way.
This automatizes the generation of logging categories so a
kdeconnect-kde.categories is generated and installed to
/usr/share/qlogging-categories5/ so kdebugsettings can use it.
Also, sets the default logging level to Warning. So now the logs
of users won't be filled with debug messages but they can
modify the configuration easily with kdebugsettings.
clazy was complaining that the class had copy constructor but no assignment operator, which is usually suspicious
This is a bit of behaviour change though, since now m_payloadTransferInfo is also copied, which before wasn't, not sure if this is actually a good or a bad thing
Device::statusIconName depends on isReachable() and isTrusted()
Not sure how the property is used but it's good that they have a NOTIFY is defined if it's needed for completion
## Summary
LanLinkProviderTest fails on Windows. This patch fixes that.
I believe the root cause is that we are using a shared UDP socket to listen for identity broadcasts both in the LanLinkProvider and in the test. Apparently this works on Linux, but on Windows the LanLinkProvider picks up its own identity packet and pairs with itself.
This patch gives a parameter to LanLinkProvider to allow it to listen and broadcast on different ports, then uses that ability in the test to make the test pass on Windows.
## Test Plan
### Before:
lanlinkprovider test fails, first because it can't bind its UDP listener socket, and then because Windows seems to handle shared sockets differently than Linux, so the UDP broadcasts were not reaching the test's listener.
### After:
lanlinkprovider test seems to pass reliably both in my Windows VM and in the CI
pluginloadtest and sendfiletest are crashing. This patch fixes that by allowing Daemon::init() to be called from TestDaemon
## Test Plan
### Before:
Both tests are crashing because it is not able to find any devices. It is not able to find any devices because the LanLinkProvider is not being added because Daemon::init() is not being called.
### After:
pluginloadtest and sendfiletest pass
Summary: This tells the new notification system that we're copying a file and lets it show a better summary.
Test Plan:
{F6821356}
Is the composite job stuff already merged? That probably needs adjusting too
Reviewers: #plasma, nicolasfella
Reviewed By: nicolasfella
Subscribers: kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D21182
Summary:
As mentioned on telegram, there are some fundamental issues with bluetooth. The only approach I could get working was multiplexing: manually sending multiple streams of data over a single connection.
This is the description of that multiplexing protocol. I have an implementation of this protocol, but I'd first like some feedback to see if this is what we're going to use before finishing up those patches.
See the document itself for more details. I make the protocol forward-compatible, although I don't expect we will need ever that.
Test Plan: None, this is just a description.
Reviewers: #kde_connect, andyholmes, albertvaka
Reviewed By: #kde_connect, albertvaka
Subscribers: albertvaka, kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D17987
Summary:
When android closes the payload socket (cancel share) calling m_socket.close() results
in a recursive call to onError eventually leading to a segmentation violation
Test Plan:
Install D16491, share a large file from desktop to android and cancel the share on Android through
the notification. kdeconnectd crashes almost 100% of the time. (It doesn't crash when it detects
a disconnect in sendNextPacket)
Reviewers: #kde_connect, nicolasfella
Reviewed By: #kde_connect, nicolasfella
Subscribers: kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D17628
Summary: If the identity packet is split across two packets, then save it until we get a notification that more data is available for reading over the bluetooth link.
Test Plan: Connect a phone and laptop over Bluetooth, and verify that both the phone and laptop are able to see each other, and that either side can start and successfully go through the pairing process.
Reviewers: #kde_connect, mtijink
Reviewed By: #kde_connect, mtijink
Subscribers: mtijink, kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D17789
Summary:
Combine multiple upload jobs for files into a single KCompositeJob so only 1 notification will be shown
Includes changes introduced in D16279
Test Plan:
1. Share of multiple files is performed using 1 composite job
Setup:
- Select multiple (big) files in dolphin and share with an Android device
Result:
- The files will be transferred using 1 CompositeUploadJob and showing only 1 notification
2. Share of file while another share is already running adds job to existing composite job
Setup:
- Select multiple (big) files in dolphin and share with an Android device
- Share an additional file with the same Android device
Result:
- The files are all transferred using 1 CompositeUploadJob and showing only 1 notification
- The notification is updated after adding the last file
3. Other packets are transmitted as usual
Setup:
- Setup sharing desktop notification with device
- Share a big file with an Android device
- Generate a desktop notification (eg. sending or receiving an email)
Result:
- Notification packet is send immediately
Reviewers: #kde_connect, nicolasfella, albertvaka
Reviewed By: #kde_connect, albertvaka
Subscribers: albertvaka, apol, nicolasfella, broulik, kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D17081
Summary:
Show progress when sending a file from the desktop
BUG: 355044
Test Plan:
Complete transfer:
-Right click on a big file in dolphin
-Select Send to xx via KDE Connect
-Open the Notifications widget and verify progress is shown correctly
Stop transfer:
-Right click on a big file in dolphin
-Select Send to xx via KDE Connect
-Open The Notifications widget and press the stop/kill button
-Observe that the file upload is stopped
Reviewers: #kde_connect, nicolasfella
Reviewed By: #kde_connect, nicolasfella
Subscribers: apol, broulik, nicolasfella, kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D16279
Summary:
No need to emit newConnection in Server::incomingConnection because QTcpServer will emit it after incomingConnection returns
QTcpServer also already has a list of pending connections so use that
Test Plan: Send a file from desktop to android and observe that newConnection is only called once
Reviewers: #kde_connect, albertvaka
Reviewed By: #kde_connect, albertvaka
Subscribers: kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D17009
Summary: Why cast sender() to server when we have m_server
Reviewers: #kde_connect, apol
Reviewed By: #kde_connect, apol
Subscribers: kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D16760
Summary: If the number of bytes received != m_size report failure and delete the partial file
Reviewers: #kde_connect, albertvaka
Reviewed By: #kde_connect, albertvaka
Subscribers: kdeconnect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D16778
