Summary:
For real usecases of SMS support, we will almost always need access to the message history in some way
Specifically resolve T8338
Incidentally resolve T6651 since Telephony shall no longer create a notification
Test Plan:
Setup:
- Build corresponding Android-side diff (D11698)
- Build this diff
Step 1: Does anything at all work?
- Put a breakpoint in the handleBatchMessages method of the telephony plugin, ideally after constructing a Message object
- Use DBus to poke /modules/kdeconnect/devices/<deviceID>/telephony.requestAllConversations()
- Verify that the constructed Message is one you sent or received and that it is the most recent in the corresponding conversation
Step 2: DBus
- Open the Interface org.kde.kdeconnect.device.conversations of /modules/kdeconnect/devices/<deviceId>
- Poke activeConversations and verify an empty array is returned
- Poke requestAllConversationThreads
- Poke activeConversations and verify that a list of numbers has been returned. These are conversationIds
- Use a conversationId to call getFirstFromConversation
- Verify that the returned Message object is one which you recognize
- Note that if the message is an MMS it will be blank and meaningless. Try a different conversationId. MMS support "coming soon!"
Step 3: SMS App
- Use ccmake (or similar) to set SMSAPP_ENABLE to ON
- Build the project
- Run ./bin/kdeconnect-sms
- Verify that the app shows a list of everyone you have an SMS conversation with (MMS messages are stripped out)
- If you have the Contacts plugin working, verify that most contacts have their name and photo instead of their phone number
Reviewers: #kde_connect, nicolasfella, apol
Reviewed By: #kde_connect, nicolasfella, apol
Subscribers: andyholmes, apol, nicolasfella, #kde_connect
Tags: #kde_connect
Maniphest Tasks: T8338, T6651
Differential Revision: https://phabricator.kde.org/D11854
Summary: Current code only supports one player
Test Plan: Run two media sessions. Dbus inspection works fine, UI has some issues with values not updated, but out of scope for this diff
Reviewers: #kde_connect, apol
Reviewed By: #kde_connect, apol
Subscribers: apol, #kde_connect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D12546
Creates a tiny messaging app that uses KPeople to query the contacts and
KDE connect telephony plugins to send plugins.
To be ready, still needs some work on the contacts sync side and some
messages history would be nice.
Summary: KDE Connect, now with correct naming!
Test Plan: It still builds.
Reviewers: #kde_connect, apol, nicolasfella
Reviewed By: #kde_connect, apol, nicolasfella
Subscribers: nicolasfella
Differential Revision: https://phabricator.kde.org/D11036
Summary:
Kdeconnect-cli always displayed one or more "error activating kdeconnectd: QDBusError("", "")" messages.
This diff uses the reply of starting the kdeconnect daemon correctly, so this does not happen anymore.
Test Plan: Kdeconnect-cli and the daemon still work, but kdeconnect-cli does not show the error message anymore. I verified that if, for some reason, the daemon could not start, it does display an error.
Reviewers: #kde_connect, apol
Reviewed By: #kde_connect, apol
Subscribers: apol
Differential Revision: https://phabricator.kde.org/D9058
Summary:
Fixed Issues mentioned in https://phabricator.kde.org/T6729
This patch also fixes a crash when the filetransfer of the icon fails
Test Plan:
Receive a notification with a previously unknown icon -> icon in Plasmoid is displayed correctly
Receive a notification with an already existing id -> notification in Plasmoid is updated
Reviewers: #kde_connect, apol
Reviewed By: #kde_connect, apol
Subscribers: albertvaka, broulik, apol, #kde_connect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D7209
Summary:
Change all member variables to the form m_fooBar because it is the preferred form in Qt (it was half and half between this and mFooBar, and a minority didn't have anything).
Place all references and pointers on the side of the type since it is the majority.
Basically:
- mFoo -> m_foo
- foo -> m_foo (if it is a member variable)
- Type &ref -> Type& ref
- Type *ptr -> Type* ptr
Reviewers: #kde_connect, nicolasfella, albertvaka
Reviewed By: #kde_connect, nicolasfella, albertvaka
Subscribers: albertvaka, #kde_connect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D7312
Summary: Like we do for the notifications in the plugin already. Passing the title and text separately to the plasmoid could be useful later as well.
Reviewers: #kde_connect, albertvaka
Reviewed By: #kde_connect, albertvaka
Subscribers: #kde_connect
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D7457
Summary:
The use of Q_FOREACH is advised against (https://doc.qt.io/qt-5/qtglobal.html#Q_FOREACH) since Qt 5.7 and will eventually be removed from Qt.
I replaced all occurrences with the range-for loop introduced in C++11 (except for the one in daemon.cpp in deviceIdByName which might have a bug / typo in it).
I added const to the container or casted it with qAsConst when appropriate to avoid unnecessary copies.
(This is my first submission. I did all the unit tests, and they all passed but I don't know how to show it here.)
Reviewers: #kde_connect, nicolasfella, apol
Reviewed By: #kde_connect, nicolasfella, apol
Subscribers: albertvaka, apol, nicolasfella
Tags: #kde_connect
Differential Revision: https://phabricator.kde.org/D6724
Summary: Makes it possible to handle tel urls with any KDE Connect device
Test Plan: Manual testing
Reviewers: #kde_connect, albertvaka, nicolasfella
Reviewed By: #kde_connect, nicolasfella
Subscribers: nicolasfella
Differential Revision: https://phabricator.kde.org/D6120
Summary:
Show an icon for each notification which has an icon.
Show a toolbutton which can be used to reply to notifications which offer a quick reply.
Reviewers: #kde_connect, albertvaka
Reviewed By: #kde_connect, albertvaka
Subscribers: albertvaka
Maniphest Tasks: T4674, T4658
Differential Revision: https://phabricator.kde.org/D6058
Allow to inject keypress events to remote peers (most notably Android devices)
Notes / open issues / possible improvements:
- For the json-payload I used the syntax of the key-events as sent by mousepad-plugin with the addition of a "sendAck"-flag. If "sendAck" is set to true the remote peer should echo a key-event if it could be handled, thus allowing the local client to find out whether the key was accepted. For performance reasons, it's allowed to send multi-char strings in the "key" property (performs much better if you send a whole string via "echo '...' | kdeconnect-cli ..." e.g.)
- kdeconnect-cli: For now takes a string and transforms it into single key-events for visible characters only. In a first implementation I used a kbhit() helper that used termios.h to catch and relay keypresses interactively (including some special-events), which was not optimal. A better approch might be to use linux input-api directly. Would this be an option regarding cross-platform compatibility or can I assume to develop for Linux only? Being a command-line guy, I'd really like to have a fully featured kdeconnect-cli interface ;-)
- Factor out the Qt::Key-to-internal keymap to some core-helper because it corresponds to the mapping in the mousepad-plugin?
- The plasmoid is not perfect as it is: A single line containing a non-echoing TextField (i.e. it eats all the KeyPress events), and only ack-ed keypress-packets from the peer device are injected if they contain visible keys. Advantage: the user sees whether his key-presses are accepted by the peer device. Disadvantage: The echoed text does not correspond 1:1 to what is shown on the peer's display, user might be confused when typing without success. I played around with different variations each of which with its proper shortcomings:
1. An echoing Textfield for typing: Has the advantage that the user can directly see what he is typing, which makes interaction in the typing field easier, BUT messes up interaction if the Editor on the peer is changed silently and does not notify the user if his keypresses are not handled by the peer.
2. A non-echoing TextField for typing PLUS a readonly one for printing visible echoed keys. Disadvantage: same as for the previous one and uses more space on the plasmoid.
Comments? Ideas?
REVIEW: 129727
BUG: 370919
Therefore notify the client that we're deleting all notifications.
Otherwise the client wouldn't notice this and the notifications would still
be available in the plasmoid.
REVIEW: 127582
The server supports this device state (e.g. if a device was saved as paired,
but isn't reachable), so let's expose it to the model.
The display filter should take care of excluding such devices if
nessecarry.
To make sure that such devices aren't shown in the kcm (we can't do anything
useful with them at the moment), set the display filter accordingly.
REVIEW: 127553
There were two clearNotifications() calls when refreshing the notification
list. As there happens nothing relevant in between them, the second call is
useless.
REVIEW: 127542
Listen to dbus registrations. Remove all devices if the service dies,
create all devices back when restored.
Same for the NotificationsModel.
REVIEW: 124183
Removes the id->row mapping. It was broken as the indices weren't updated
when a row was added or removed.
Stop exposing Device::id through dbus, just store it in the interface
class.
* It's redundant as it's part of the interface definition
* If we keep it it will save us quite some dbus round-trips
* It will be reliable, as nowadays id() sometimes QString() if the dbus
connection is invalid.
REVIEW: 124158
Add API to call random public plugin methods
qdbusxml2cpp is not generating the Q_PROPERTY attribute. For now [1], add
it ourselves by addding a proxy signal.
REVIEW: 124077
Uses KPluginLoader+KPluginMetadata instead.
Describes plugins in json instead of desktop files. These desktop files are
then embedded into the .so file. All the plugins will be in a kdeconnect/
directory, and those will be the ones to look for.
Note it doesn't drop the KService dependency as KIOCore is a KDE Connect
dependency as well.
REVIEW: 123042
Make the population asynchronous on dbus. Wait for the device list and
don't populate it until it's ready. There's no reason to block.
Don't emit after endInsertRows. It doesn't help, as the views will have
already refreshed.
Benefits:
- We had config files in different paths, now they will be centralized.
- Daemon, LanLinkProvider and NetworkPackage depend only on Qt now.
- KConfig is accessed with strings as keys, where a typo can go unnoticed.
- Daemon is now thinner, as it doesn't need to initialize config values.
- QCA::Initializer is in a single place now (was in Daemon and Plugin).
