kdeconnect-kde/smsapp/conversationmodel.cpp

231 lines
8.5 KiB
C++
Raw Normal View History

2018-10-11 21:52:42 +01:00
/**
* Copyright (C) 2018 Aleix Pol Gonzalez <aleixpol@kde.org>
2018-10-11 21:52:42 +01:00
* Copyright (C) 2018 Simon Redman <simon@ergotech.com>
*
2018-10-11 21:52:42 +01:00
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License or (at your option) version 3 or any later version
* accepted by the membership of KDE e.V. (or its successor approved
* by the membership of KDE e.V.), which shall act as a proxy
* defined in Section 14 of version 3 of the license.
*
2018-10-11 21:52:42 +01:00
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
2018-10-11 21:52:42 +01:00
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
2018-10-11 21:52:42 +01:00
* You should have received a copy of the GNU General Public License
2019-03-23 16:29:26 +00:00
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*/
#include "conversationmodel.h"
#include <KLocalizedString>
#include <QQmlApplicationEngine>
#include <QQmlContext>
(WIP) Upgrade Telephony plugin to read SMS history (KDE side) Summary: For real usecases of SMS support, we will almost always need access to the message history in some way Specifically resolve T8338 Incidentally resolve T6651 since Telephony shall no longer create a notification Test Plan: Setup: - Build corresponding Android-side diff (D11698) - Build this diff Step 1: Does anything at all work? - Put a breakpoint in the handleBatchMessages method of the telephony plugin, ideally after constructing a Message object - Use DBus to poke /modules/kdeconnect/devices/<deviceID>/telephony.requestAllConversations() - Verify that the constructed Message is one you sent or received and that it is the most recent in the corresponding conversation Step 2: DBus - Open the Interface org.kde.kdeconnect.device.conversations of /modules/kdeconnect/devices/<deviceId> - Poke activeConversations and verify an empty array is returned - Poke requestAllConversationThreads - Poke activeConversations and verify that a list of numbers has been returned. These are conversationIds - Use a conversationId to call getFirstFromConversation - Verify that the returned Message object is one which you recognize - Note that if the message is an MMS it will be blank and meaningless. Try a different conversationId. MMS support "coming soon!" Step 3: SMS App - Use ccmake (or similar) to set SMSAPP_ENABLE to ON - Build the project - Run ./bin/kdeconnect-sms - Verify that the app shows a list of everyone you have an SMS conversation with (MMS messages are stripped out) - If you have the Contacts plugin working, verify that most contacts have their name and photo instead of their phone number Reviewers: #kde_connect, nicolasfella, apol Reviewed By: #kde_connect, nicolasfella, apol Subscribers: andyholmes, apol, nicolasfella, #kde_connect Tags: #kde_connect Maniphest Tasks: T8338, T6651 Differential Revision: https://phabricator.kde.org/D11854
2018-05-25 15:21:56 +01:00
#include "interfaces/conversationmessage.h"
#include "smshelper.h"
#include "attachmentinfo.h"
(WIP) Upgrade Telephony plugin to read SMS history (KDE side) Summary: For real usecases of SMS support, we will almost always need access to the message history in some way Specifically resolve T8338 Incidentally resolve T6651 since Telephony shall no longer create a notification Test Plan: Setup: - Build corresponding Android-side diff (D11698) - Build this diff Step 1: Does anything at all work? - Put a breakpoint in the handleBatchMessages method of the telephony plugin, ideally after constructing a Message object - Use DBus to poke /modules/kdeconnect/devices/<deviceID>/telephony.requestAllConversations() - Verify that the constructed Message is one you sent or received and that it is the most recent in the corresponding conversation Step 2: DBus - Open the Interface org.kde.kdeconnect.device.conversations of /modules/kdeconnect/devices/<deviceId> - Poke activeConversations and verify an empty array is returned - Poke requestAllConversationThreads - Poke activeConversations and verify that a list of numbers has been returned. These are conversationIds - Use a conversationId to call getFirstFromConversation - Verify that the returned Message object is one which you recognize - Note that if the message is an MMS it will be blank and meaningless. Try a different conversationId. MMS support "coming soon!" Step 3: SMS App - Use ccmake (or similar) to set SMSAPP_ENABLE to ON - Build the project - Run ./bin/kdeconnect-sms - Verify that the app shows a list of everyone you have an SMS conversation with (MMS messages are stripped out) - If you have the Contacts plugin working, verify that most contacts have their name and photo instead of their phone number Reviewers: #kde_connect, nicolasfella, apol Reviewed By: #kde_connect, nicolasfella, apol Subscribers: andyholmes, apol, nicolasfella, #kde_connect Tags: #kde_connect Maniphest Tasks: T8338, T6651 Differential Revision: https://phabricator.kde.org/D11854
2018-05-25 15:21:56 +01:00
#include "sms_conversation_debug.h"
ConversationModel::ConversationModel(QObject* parent)
: QStandardItemModel(parent)
(WIP) Upgrade Telephony plugin to read SMS history (KDE side) Summary: For real usecases of SMS support, we will almost always need access to the message history in some way Specifically resolve T8338 Incidentally resolve T6651 since Telephony shall no longer create a notification Test Plan: Setup: - Build corresponding Android-side diff (D11698) - Build this diff Step 1: Does anything at all work? - Put a breakpoint in the handleBatchMessages method of the telephony plugin, ideally after constructing a Message object - Use DBus to poke /modules/kdeconnect/devices/<deviceID>/telephony.requestAllConversations() - Verify that the constructed Message is one you sent or received and that it is the most recent in the corresponding conversation Step 2: DBus - Open the Interface org.kde.kdeconnect.device.conversations of /modules/kdeconnect/devices/<deviceId> - Poke activeConversations and verify an empty array is returned - Poke requestAllConversationThreads - Poke activeConversations and verify that a list of numbers has been returned. These are conversationIds - Use a conversationId to call getFirstFromConversation - Verify that the returned Message object is one which you recognize - Note that if the message is an MMS it will be blank and meaningless. Try a different conversationId. MMS support "coming soon!" Step 3: SMS App - Use ccmake (or similar) to set SMSAPP_ENABLE to ON - Build the project - Run ./bin/kdeconnect-sms - Verify that the app shows a list of everyone you have an SMS conversation with (MMS messages are stripped out) - If you have the Contacts plugin working, verify that most contacts have their name and photo instead of their phone number Reviewers: #kde_connect, nicolasfella, apol Reviewed By: #kde_connect, nicolasfella, apol Subscribers: andyholmes, apol, nicolasfella, #kde_connect Tags: #kde_connect Maniphest Tasks: T8338, T6651 Differential Revision: https://phabricator.kde.org/D11854
2018-05-25 15:21:56 +01:00
, m_conversationsInterface(nullptr)
{
auto roles = roleNames();
roles.insert(FromMeRole, "fromMe");
(WIP) Upgrade Telephony plugin to read SMS history (KDE side) Summary: For real usecases of SMS support, we will almost always need access to the message history in some way Specifically resolve T8338 Incidentally resolve T6651 since Telephony shall no longer create a notification Test Plan: Setup: - Build corresponding Android-side diff (D11698) - Build this diff Step 1: Does anything at all work? - Put a breakpoint in the handleBatchMessages method of the telephony plugin, ideally after constructing a Message object - Use DBus to poke /modules/kdeconnect/devices/<deviceID>/telephony.requestAllConversations() - Verify that the constructed Message is one you sent or received and that it is the most recent in the corresponding conversation Step 2: DBus - Open the Interface org.kde.kdeconnect.device.conversations of /modules/kdeconnect/devices/<deviceId> - Poke activeConversations and verify an empty array is returned - Poke requestAllConversationThreads - Poke activeConversations and verify that a list of numbers has been returned. These are conversationIds - Use a conversationId to call getFirstFromConversation - Verify that the returned Message object is one which you recognize - Note that if the message is an MMS it will be blank and meaningless. Try a different conversationId. MMS support "coming soon!" Step 3: SMS App - Use ccmake (or similar) to set SMSAPP_ENABLE to ON - Build the project - Run ./bin/kdeconnect-sms - Verify that the app shows a list of everyone you have an SMS conversation with (MMS messages are stripped out) - If you have the Contacts plugin working, verify that most contacts have their name and photo instead of their phone number Reviewers: #kde_connect, nicolasfella, apol Reviewed By: #kde_connect, nicolasfella, apol Subscribers: andyholmes, apol, nicolasfella, #kde_connect Tags: #kde_connect Maniphest Tasks: T8338, T6651 Differential Revision: https://phabricator.kde.org/D11854
2018-05-25 15:21:56 +01:00
roles.insert(DateRole, "date");
roles.insert(SenderRole, "sender");
roles.insert(AvatarRole, "avatar");
roles.insert(AttachmentsRole, "attachments");
setItemRoleNames(roles);
}
(WIP) Upgrade Telephony plugin to read SMS history (KDE side) Summary: For real usecases of SMS support, we will almost always need access to the message history in some way Specifically resolve T8338 Incidentally resolve T6651 since Telephony shall no longer create a notification Test Plan: Setup: - Build corresponding Android-side diff (D11698) - Build this diff Step 1: Does anything at all work? - Put a breakpoint in the handleBatchMessages method of the telephony plugin, ideally after constructing a Message object - Use DBus to poke /modules/kdeconnect/devices/<deviceID>/telephony.requestAllConversations() - Verify that the constructed Message is one you sent or received and that it is the most recent in the corresponding conversation Step 2: DBus - Open the Interface org.kde.kdeconnect.device.conversations of /modules/kdeconnect/devices/<deviceId> - Poke activeConversations and verify an empty array is returned - Poke requestAllConversationThreads - Poke activeConversations and verify that a list of numbers has been returned. These are conversationIds - Use a conversationId to call getFirstFromConversation - Verify that the returned Message object is one which you recognize - Note that if the message is an MMS it will be blank and meaningless. Try a different conversationId. MMS support "coming soon!" Step 3: SMS App - Use ccmake (or similar) to set SMSAPP_ENABLE to ON - Build the project - Run ./bin/kdeconnect-sms - Verify that the app shows a list of everyone you have an SMS conversation with (MMS messages are stripped out) - If you have the Contacts plugin working, verify that most contacts have their name and photo instead of their phone number Reviewers: #kde_connect, nicolasfella, apol Reviewed By: #kde_connect, nicolasfella, apol Subscribers: andyholmes, apol, nicolasfella, #kde_connect Tags: #kde_connect Maniphest Tasks: T8338, T6651 Differential Revision: https://phabricator.kde.org/D11854
2018-05-25 15:21:56 +01:00
ConversationModel::~ConversationModel()
{
}
qint64 ConversationModel::threadId() const
{
(WIP) Upgrade Telephony plugin to read SMS history (KDE side) Summary: For real usecases of SMS support, we will almost always need access to the message history in some way Specifically resolve T8338 Incidentally resolve T6651 since Telephony shall no longer create a notification Test Plan: Setup: - Build corresponding Android-side diff (D11698) - Build this diff Step 1: Does anything at all work? - Put a breakpoint in the handleBatchMessages method of the telephony plugin, ideally after constructing a Message object - Use DBus to poke /modules/kdeconnect/devices/<deviceID>/telephony.requestAllConversations() - Verify that the constructed Message is one you sent or received and that it is the most recent in the corresponding conversation Step 2: DBus - Open the Interface org.kde.kdeconnect.device.conversations of /modules/kdeconnect/devices/<deviceId> - Poke activeConversations and verify an empty array is returned - Poke requestAllConversationThreads - Poke activeConversations and verify that a list of numbers has been returned. These are conversationIds - Use a conversationId to call getFirstFromConversation - Verify that the returned Message object is one which you recognize - Note that if the message is an MMS it will be blank and meaningless. Try a different conversationId. MMS support "coming soon!" Step 3: SMS App - Use ccmake (or similar) to set SMSAPP_ENABLE to ON - Build the project - Run ./bin/kdeconnect-sms - Verify that the app shows a list of everyone you have an SMS conversation with (MMS messages are stripped out) - If you have the Contacts plugin working, verify that most contacts have their name and photo instead of their phone number Reviewers: #kde_connect, nicolasfella, apol Reviewed By: #kde_connect, nicolasfella, apol Subscribers: andyholmes, apol, nicolasfella, #kde_connect Tags: #kde_connect Maniphest Tasks: T8338, T6651 Differential Revision: https://phabricator.kde.org/D11854
2018-05-25 15:21:56 +01:00
return m_threadId;
}
void ConversationModel::setThreadId(const qint64& threadId)
{
(WIP) Upgrade Telephony plugin to read SMS history (KDE side) Summary: For real usecases of SMS support, we will almost always need access to the message history in some way Specifically resolve T8338 Incidentally resolve T6651 since Telephony shall no longer create a notification Test Plan: Setup: - Build corresponding Android-side diff (D11698) - Build this diff Step 1: Does anything at all work? - Put a breakpoint in the handleBatchMessages method of the telephony plugin, ideally after constructing a Message object - Use DBus to poke /modules/kdeconnect/devices/<deviceID>/telephony.requestAllConversations() - Verify that the constructed Message is one you sent or received and that it is the most recent in the corresponding conversation Step 2: DBus - Open the Interface org.kde.kdeconnect.device.conversations of /modules/kdeconnect/devices/<deviceId> - Poke activeConversations and verify an empty array is returned - Poke requestAllConversationThreads - Poke activeConversations and verify that a list of numbers has been returned. These are conversationIds - Use a conversationId to call getFirstFromConversation - Verify that the returned Message object is one which you recognize - Note that if the message is an MMS it will be blank and meaningless. Try a different conversationId. MMS support "coming soon!" Step 3: SMS App - Use ccmake (or similar) to set SMSAPP_ENABLE to ON - Build the project - Run ./bin/kdeconnect-sms - Verify that the app shows a list of everyone you have an SMS conversation with (MMS messages are stripped out) - If you have the Contacts plugin working, verify that most contacts have their name and photo instead of their phone number Reviewers: #kde_connect, nicolasfella, apol Reviewed By: #kde_connect, nicolasfella, apol Subscribers: andyholmes, apol, nicolasfella, #kde_connect Tags: #kde_connect Maniphest Tasks: T8338, T6651 Differential Revision: https://phabricator.kde.org/D11854
2018-05-25 15:21:56 +01:00
if (m_threadId == threadId)
return;
m_threadId = threadId;
clear();
knownMessageIDs.clear();
if (m_threadId != INVALID_THREAD_ID && !m_deviceId.isEmpty()) {
requestMoreMessages();
m_thumbnailsProvider->clear();
(WIP) Upgrade Telephony plugin to read SMS history (KDE side) Summary: For real usecases of SMS support, we will almost always need access to the message history in some way Specifically resolve T8338 Incidentally resolve T6651 since Telephony shall no longer create a notification Test Plan: Setup: - Build corresponding Android-side diff (D11698) - Build this diff Step 1: Does anything at all work? - Put a breakpoint in the handleBatchMessages method of the telephony plugin, ideally after constructing a Message object - Use DBus to poke /modules/kdeconnect/devices/<deviceID>/telephony.requestAllConversations() - Verify that the constructed Message is one you sent or received and that it is the most recent in the corresponding conversation Step 2: DBus - Open the Interface org.kde.kdeconnect.device.conversations of /modules/kdeconnect/devices/<deviceId> - Poke activeConversations and verify an empty array is returned - Poke requestAllConversationThreads - Poke activeConversations and verify that a list of numbers has been returned. These are conversationIds - Use a conversationId to call getFirstFromConversation - Verify that the returned Message object is one which you recognize - Note that if the message is an MMS it will be blank and meaningless. Try a different conversationId. MMS support "coming soon!" Step 3: SMS App - Use ccmake (or similar) to set SMSAPP_ENABLE to ON - Build the project - Run ./bin/kdeconnect-sms - Verify that the app shows a list of everyone you have an SMS conversation with (MMS messages are stripped out) - If you have the Contacts plugin working, verify that most contacts have their name and photo instead of their phone number Reviewers: #kde_connect, nicolasfella, apol Reviewed By: #kde_connect, nicolasfella, apol Subscribers: andyholmes, apol, nicolasfella, #kde_connect Tags: #kde_connect Maniphest Tasks: T8338, T6651 Differential Revision: https://phabricator.kde.org/D11854
2018-05-25 15:21:56 +01:00
}
}
void ConversationModel::setDeviceId(const QString& deviceId)
{
if (deviceId == m_deviceId)
return;
qCDebug(KDECONNECT_SMS_CONVERSATION_MODEL) << "setDeviceId" << "of" << this;
if (m_conversationsInterface) {
disconnect(m_conversationsInterface, SIGNAL(conversationUpdated(QDBusVariant)), this, SLOT(handleConversationUpdate(QDBusVariant)));
disconnect(m_conversationsInterface, SIGNAL(conversationLoaded(qint64, quint64)), this, SLOT(handleConversationLoaded(qint64, quint64)));
disconnect(m_conversationsInterface, SIGNAL(conversationCreated(QDBusVariant)), this, SLOT(handleConversationCreated(QDBusVariant)));
delete m_conversationsInterface;
}
(WIP) Upgrade Telephony plugin to read SMS history (KDE side) Summary: For real usecases of SMS support, we will almost always need access to the message history in some way Specifically resolve T8338 Incidentally resolve T6651 since Telephony shall no longer create a notification Test Plan: Setup: - Build corresponding Android-side diff (D11698) - Build this diff Step 1: Does anything at all work? - Put a breakpoint in the handleBatchMessages method of the telephony plugin, ideally after constructing a Message object - Use DBus to poke /modules/kdeconnect/devices/<deviceID>/telephony.requestAllConversations() - Verify that the constructed Message is one you sent or received and that it is the most recent in the corresponding conversation Step 2: DBus - Open the Interface org.kde.kdeconnect.device.conversations of /modules/kdeconnect/devices/<deviceId> - Poke activeConversations and verify an empty array is returned - Poke requestAllConversationThreads - Poke activeConversations and verify that a list of numbers has been returned. These are conversationIds - Use a conversationId to call getFirstFromConversation - Verify that the returned Message object is one which you recognize - Note that if the message is an MMS it will be blank and meaningless. Try a different conversationId. MMS support "coming soon!" Step 3: SMS App - Use ccmake (or similar) to set SMSAPP_ENABLE to ON - Build the project - Run ./bin/kdeconnect-sms - Verify that the app shows a list of everyone you have an SMS conversation with (MMS messages are stripped out) - If you have the Contacts plugin working, verify that most contacts have their name and photo instead of their phone number Reviewers: #kde_connect, nicolasfella, apol Reviewed By: #kde_connect, nicolasfella, apol Subscribers: andyholmes, apol, nicolasfella, #kde_connect Tags: #kde_connect Maniphest Tasks: T8338, T6651 Differential Revision: https://phabricator.kde.org/D11854
2018-05-25 15:21:56 +01:00
m_deviceId = deviceId;
m_conversationsInterface = new DeviceConversationsDbusInterface(deviceId, this);
connect(m_conversationsInterface, SIGNAL(conversationUpdated(QDBusVariant)), this, SLOT(handleConversationUpdate(QDBusVariant)));
connect(m_conversationsInterface, SIGNAL(conversationLoaded(qint64, quint64)), this, SLOT(handleConversationLoaded(qint64, quint64)));
connect(m_conversationsInterface, SIGNAL(conversationCreated(QDBusVariant)), this, SLOT(handleConversationCreated(QDBusVariant)));
QQmlApplicationEngine* engine = qobject_cast<QQmlApplicationEngine*>(QQmlEngine::contextForObject(this)->engine());
m_thumbnailsProvider = dynamic_cast<ThumbnailsProvider*>(engine->imageProvider(QStringLiteral("thumbnailsProvider")));
// Clear any previous data on device change
m_thumbnailsProvider->clear();
}
void ConversationModel::setAddressList(const QList<ConversationAddress>& addressList) {
m_addressList = addressList;
(WIP) Upgrade Telephony plugin to read SMS history (KDE side) Summary: For real usecases of SMS support, we will almost always need access to the message history in some way Specifically resolve T8338 Incidentally resolve T6651 since Telephony shall no longer create a notification Test Plan: Setup: - Build corresponding Android-side diff (D11698) - Build this diff Step 1: Does anything at all work? - Put a breakpoint in the handleBatchMessages method of the telephony plugin, ideally after constructing a Message object - Use DBus to poke /modules/kdeconnect/devices/<deviceID>/telephony.requestAllConversations() - Verify that the constructed Message is one you sent or received and that it is the most recent in the corresponding conversation Step 2: DBus - Open the Interface org.kde.kdeconnect.device.conversations of /modules/kdeconnect/devices/<deviceId> - Poke activeConversations and verify an empty array is returned - Poke requestAllConversationThreads - Poke activeConversations and verify that a list of numbers has been returned. These are conversationIds - Use a conversationId to call getFirstFromConversation - Verify that the returned Message object is one which you recognize - Note that if the message is an MMS it will be blank and meaningless. Try a different conversationId. MMS support "coming soon!" Step 3: SMS App - Use ccmake (or similar) to set SMSAPP_ENABLE to ON - Build the project - Run ./bin/kdeconnect-sms - Verify that the app shows a list of everyone you have an SMS conversation with (MMS messages are stripped out) - If you have the Contacts plugin working, verify that most contacts have their name and photo instead of their phone number Reviewers: #kde_connect, nicolasfella, apol Reviewed By: #kde_connect, nicolasfella, apol Subscribers: andyholmes, apol, nicolasfella, #kde_connect Tags: #kde_connect Maniphest Tasks: T8338, T6651 Differential Revision: https://phabricator.kde.org/D11854
2018-05-25 15:21:56 +01:00
}
void ConversationModel::sendReplyToConversation(const QString& message)
{
//qCDebug(KDECONNECT_SMS_CONVERSATION_MODEL) << "Trying to send" << message << "to conversation with ID" << m_threadId;
(WIP) Upgrade Telephony plugin to read SMS history (KDE side) Summary: For real usecases of SMS support, we will almost always need access to the message history in some way Specifically resolve T8338 Incidentally resolve T6651 since Telephony shall no longer create a notification Test Plan: Setup: - Build corresponding Android-side diff (D11698) - Build this diff Step 1: Does anything at all work? - Put a breakpoint in the handleBatchMessages method of the telephony plugin, ideally after constructing a Message object - Use DBus to poke /modules/kdeconnect/devices/<deviceID>/telephony.requestAllConversations() - Verify that the constructed Message is one you sent or received and that it is the most recent in the corresponding conversation Step 2: DBus - Open the Interface org.kde.kdeconnect.device.conversations of /modules/kdeconnect/devices/<deviceId> - Poke activeConversations and verify an empty array is returned - Poke requestAllConversationThreads - Poke activeConversations and verify that a list of numbers has been returned. These are conversationIds - Use a conversationId to call getFirstFromConversation - Verify that the returned Message object is one which you recognize - Note that if the message is an MMS it will be blank and meaningless. Try a different conversationId. MMS support "coming soon!" Step 3: SMS App - Use ccmake (or similar) to set SMSAPP_ENABLE to ON - Build the project - Run ./bin/kdeconnect-sms - Verify that the app shows a list of everyone you have an SMS conversation with (MMS messages are stripped out) - If you have the Contacts plugin working, verify that most contacts have their name and photo instead of their phone number Reviewers: #kde_connect, nicolasfella, apol Reviewed By: #kde_connect, nicolasfella, apol Subscribers: andyholmes, apol, nicolasfella, #kde_connect Tags: #kde_connect Maniphest Tasks: T8338, T6651 Differential Revision: https://phabricator.kde.org/D11854
2018-05-25 15:21:56 +01:00
m_conversationsInterface->replyToConversation(m_threadId, message);
}
void ConversationModel::startNewConversation(const QString& message, const QList<ConversationAddress>& addressList)
{
QVariantList addresses;
for (const auto& address : addressList) {
addresses << QVariant::fromValue(address);
}
m_conversationsInterface->sendWithoutConversation(addresses, message);
}
void ConversationModel::requestMoreMessages(const quint32& howMany)
{
if (m_threadId == INVALID_THREAD_ID) {
return;
}
const auto& numMessages = knownMessageIDs.size();
m_conversationsInterface->requestConversation(m_threadId, numMessages, numMessages + howMany);
}
void ConversationModel::createRowFromMessage(const ConversationMessage& message, int pos)
{
if (message.threadID() != m_threadId) {
// Because of the asynchronous nature of the current implementation of this model, if the
// user clicks quickly between threads or for some other reason a message comes when we're
// not expecting it, we should not display it in the wrong place
qCDebug(KDECONNECT_SMS_CONVERSATION_MODEL)
<< "Got a message for a thread" << message.threadID()
<< "but we are currently viewing" << m_threadId
<< "Discarding.";
return;
}
if (knownMessageIDs.contains(message.uID())) {
qCDebug(KDECONNECT_SMS_CONVERSATION_MODEL)
<< "Ignoring duplicate message with ID" << message.uID();
return;
}
ConversationAddress sender = message.addresses().first();
2019-07-23 12:42:32 +01:00
QString senderName = message.isIncoming() ? SmsHelper::getTitleForAddresses({sender}) : QString();
QString displayBody = message.body();
(WIP) Upgrade Telephony plugin to read SMS history (KDE side) Summary: For real usecases of SMS support, we will almost always need access to the message history in some way Specifically resolve T8338 Incidentally resolve T6651 since Telephony shall no longer create a notification Test Plan: Setup: - Build corresponding Android-side diff (D11698) - Build this diff Step 1: Does anything at all work? - Put a breakpoint in the handleBatchMessages method of the telephony plugin, ideally after constructing a Message object - Use DBus to poke /modules/kdeconnect/devices/<deviceID>/telephony.requestAllConversations() - Verify that the constructed Message is one you sent or received and that it is the most recent in the corresponding conversation Step 2: DBus - Open the Interface org.kde.kdeconnect.device.conversations of /modules/kdeconnect/devices/<deviceId> - Poke activeConversations and verify an empty array is returned - Poke requestAllConversationThreads - Poke activeConversations and verify that a list of numbers has been returned. These are conversationIds - Use a conversationId to call getFirstFromConversation - Verify that the returned Message object is one which you recognize - Note that if the message is an MMS it will be blank and meaningless. Try a different conversationId. MMS support "coming soon!" Step 3: SMS App - Use ccmake (or similar) to set SMSAPP_ENABLE to ON - Build the project - Run ./bin/kdeconnect-sms - Verify that the app shows a list of everyone you have an SMS conversation with (MMS messages are stripped out) - If you have the Contacts plugin working, verify that most contacts have their name and photo instead of their phone number Reviewers: #kde_connect, nicolasfella, apol Reviewed By: #kde_connect, nicolasfella, apol Subscribers: andyholmes, apol, nicolasfella, #kde_connect Tags: #kde_connect Maniphest Tasks: T8338, T6651 Differential Revision: https://phabricator.kde.org/D11854
2018-05-25 15:21:56 +01:00
auto item = new QStandardItem;
item->setText(displayBody);
item->setData(message.isOutgoing(), FromMeRole);
(WIP) Upgrade Telephony plugin to read SMS history (KDE side) Summary: For real usecases of SMS support, we will almost always need access to the message history in some way Specifically resolve T8338 Incidentally resolve T6651 since Telephony shall no longer create a notification Test Plan: Setup: - Build corresponding Android-side diff (D11698) - Build this diff Step 1: Does anything at all work? - Put a breakpoint in the handleBatchMessages method of the telephony plugin, ideally after constructing a Message object - Use DBus to poke /modules/kdeconnect/devices/<deviceID>/telephony.requestAllConversations() - Verify that the constructed Message is one you sent or received and that it is the most recent in the corresponding conversation Step 2: DBus - Open the Interface org.kde.kdeconnect.device.conversations of /modules/kdeconnect/devices/<deviceId> - Poke activeConversations and verify an empty array is returned - Poke requestAllConversationThreads - Poke activeConversations and verify that a list of numbers has been returned. These are conversationIds - Use a conversationId to call getFirstFromConversation - Verify that the returned Message object is one which you recognize - Note that if the message is an MMS it will be blank and meaningless. Try a different conversationId. MMS support "coming soon!" Step 3: SMS App - Use ccmake (or similar) to set SMSAPP_ENABLE to ON - Build the project - Run ./bin/kdeconnect-sms - Verify that the app shows a list of everyone you have an SMS conversation with (MMS messages are stripped out) - If you have the Contacts plugin working, verify that most contacts have their name and photo instead of their phone number Reviewers: #kde_connect, nicolasfella, apol Reviewed By: #kde_connect, nicolasfella, apol Subscribers: andyholmes, apol, nicolasfella, #kde_connect Tags: #kde_connect Maniphest Tasks: T8338, T6651 Differential Revision: https://phabricator.kde.org/D11854
2018-05-25 15:21:56 +01:00
item->setData(message.date(), DateRole);
item->setData(senderName, SenderRole);
QList<QVariant> attachmentInfoList;
const QList<Attachment> attachmentList = message.attachments();
for (const Attachment& attachment : attachmentList) {
AttachmentInfo attachmentInfo(attachment);
attachmentInfoList.append(QVariant::fromValue(attachmentInfo));
if (attachment.mimeType().startsWith(QLatin1String("image")) || attachment.mimeType().startsWith(QLatin1String("video"))) {
// The message contains thumbnail as Base64 String, convert it back into image thumbnail
const QByteArray byteArray = attachment.base64EncodedFile().toUtf8();
QPixmap thumbnail;
thumbnail.loadFromData(QByteArray::fromBase64(byteArray));
m_thumbnailsProvider->addImage(attachment.uniqueIdentifier(), thumbnail.toImage());
}
}
item->setData(attachmentInfoList, AttachmentsRole);
(WIP) Upgrade Telephony plugin to read SMS history (KDE side) Summary: For real usecases of SMS support, we will almost always need access to the message history in some way Specifically resolve T8338 Incidentally resolve T6651 since Telephony shall no longer create a notification Test Plan: Setup: - Build corresponding Android-side diff (D11698) - Build this diff Step 1: Does anything at all work? - Put a breakpoint in the handleBatchMessages method of the telephony plugin, ideally after constructing a Message object - Use DBus to poke /modules/kdeconnect/devices/<deviceID>/telephony.requestAllConversations() - Verify that the constructed Message is one you sent or received and that it is the most recent in the corresponding conversation Step 2: DBus - Open the Interface org.kde.kdeconnect.device.conversations of /modules/kdeconnect/devices/<deviceId> - Poke activeConversations and verify an empty array is returned - Poke requestAllConversationThreads - Poke activeConversations and verify that a list of numbers has been returned. These are conversationIds - Use a conversationId to call getFirstFromConversation - Verify that the returned Message object is one which you recognize - Note that if the message is an MMS it will be blank and meaningless. Try a different conversationId. MMS support "coming soon!" Step 3: SMS App - Use ccmake (or similar) to set SMSAPP_ENABLE to ON - Build the project - Run ./bin/kdeconnect-sms - Verify that the app shows a list of everyone you have an SMS conversation with (MMS messages are stripped out) - If you have the Contacts plugin working, verify that most contacts have their name and photo instead of their phone number Reviewers: #kde_connect, nicolasfella, apol Reviewed By: #kde_connect, nicolasfella, apol Subscribers: andyholmes, apol, nicolasfella, #kde_connect Tags: #kde_connect Maniphest Tasks: T8338, T6651 Differential Revision: https://phabricator.kde.org/D11854
2018-05-25 15:21:56 +01:00
insertRow(pos, item);
knownMessageIDs.insert(message.uID());
}
void ConversationModel::handleConversationUpdate(const QDBusVariant& msg)
{
ConversationMessage message = ConversationMessage::fromDBus(msg);
if (message.threadID() != m_threadId) {
// If a conversation which we are not currently viewing was updated, discard the information
qCDebug(KDECONNECT_SMS_CONVERSATION_MODEL)
<< "Saw update for thread" << message.threadID()
<< "but we are currently viewing" << m_threadId;
return;
}
createRowFromMessage(message, 0);
}
void ConversationModel::handleConversationCreated(const QDBusVariant& msg)
{
ConversationMessage message = ConversationMessage::fromDBus(msg);
if (m_threadId == INVALID_THREAD_ID && SmsHelper::isPhoneNumberMatch(m_addressList[0].address(), message.addresses().first().address()) && !message.isMultitarget()) {
m_threadId = message.threadID();
createRowFromMessage(message, 0);
}
}
void ConversationModel::handleConversationLoaded(qint64 threadID, quint64 numMessages)
{
2019-07-31 21:35:33 +01:00
Q_UNUSED(numMessages)
if (threadID != m_threadId) {
return;
}
// If we get this flag, it means that the phone will not be responding with any more messages
// so we should not be showing a loading indicator
Q_EMIT loadingFinished();
}
Show remaining character count in SMS app ## Summary This adds character counter below the “Send” button in SMS conversation. It uses format XXX/Y where XXX is number of characters that can be added without splitting the SMS into multiple messages (see article Concatenated SMS on Wikipedia). Y is number of messages in in current concatenated SMS. The counter is not visible when insertion of 10 7-bit or 16-bit (depends on SMS encoding) does not create concatenated SMS. SMS encoding is automatically guessed. 8-bit encodings are not supported. If the message contains characters that are not supported by GSM 7-bit encoding, counter automatically switches to UCS-2. ## Test Plan Try entering some text that is longer than 150 characters in [GSM 03.38 encoding][1] or 60 characters in UCS-2. Number of remaining characters should be visible below the “Send” button. The character counter should show `0` at exactly 160 or 70 characters. Inserting one character should switch the counter to [Concatenated SMS][2] mode when number of messages is shown. It should show exactly same number as SMS app in Android. ## Screenshots These images are in APNG. ![grab.apng](/uploads/21ae23f2fa75c7aca487e61ddce94644/grab.apng) ![grab-cz.apng](/uploads/785e670a8598c5a65a4209f17e75f578/grab-cz.apng) [1]: https://en.wikipedia.org/w/index.php?oldid=932080074#GSM_7-bit_default_alphabet_and_extension_table_of_3GPP_TS_23.038_/_GSM_03.38 [2]: https://en.wikipedia.org/w/index.php?oldid=943185255#Message_size
2020-03-22 18:47:12 +00:00
QString ConversationModel::getCharCountInfo(const QString& message) const
{
SmsCharCount count = SmsHelper::getCharCount(message);
Show remaining character count in SMS app ## Summary This adds character counter below the “Send” button in SMS conversation. It uses format XXX/Y where XXX is number of characters that can be added without splitting the SMS into multiple messages (see article Concatenated SMS on Wikipedia). Y is number of messages in in current concatenated SMS. The counter is not visible when insertion of 10 7-bit or 16-bit (depends on SMS encoding) does not create concatenated SMS. SMS encoding is automatically guessed. 8-bit encodings are not supported. If the message contains characters that are not supported by GSM 7-bit encoding, counter automatically switches to UCS-2. ## Test Plan Try entering some text that is longer than 150 characters in [GSM 03.38 encoding][1] or 60 characters in UCS-2. Number of remaining characters should be visible below the “Send” button. The character counter should show `0` at exactly 160 or 70 characters. Inserting one character should switch the counter to [Concatenated SMS][2] mode when number of messages is shown. It should show exactly same number as SMS app in Android. ## Screenshots These images are in APNG. ![grab.apng](/uploads/21ae23f2fa75c7aca487e61ddce94644/grab.apng) ![grab-cz.apng](/uploads/785e670a8598c5a65a4209f17e75f578/grab-cz.apng) [1]: https://en.wikipedia.org/w/index.php?oldid=932080074#GSM_7-bit_default_alphabet_and_extension_table_of_3GPP_TS_23.038_/_GSM_03.38 [2]: https://en.wikipedia.org/w/index.php?oldid=943185255#Message_size
2020-03-22 18:47:12 +00:00
if (count.messages > 1) {
// Show remaining char count and message count
return QString::number(count.remaining) + QLatin1Char('/') + QString::number(count.messages);
}
if (count.messages == 1 && count.remaining < 10) {
// Show only remaining char count
return QString::number(count.remaining);
}
else {
// Do not show anything
return QString();
}
}