This gets cleaner.

credentials.json

@@ -0,0 +1,6 @@
+{
+    "stock": [["miner", "miner"], ["root", "root"]],
+    "braiins": [["root", "root"]],
+    "luxos": [["root", "root"]],
+    // "vnish": [["user", "password"]] // apparently vnish's ssh port is closed? I messaged them on telegram asking about it.
+}

errors.json

@@ -0,0 +1,14 @@
+{
+    "error_keywords": [
+        "ERROR_TEMP_TOO_HIGH",
+        "ERROR_HASHRATE_TOO_LOW",
+        "ERROR_NETWORK_DISCONNECTED",
+        "ERROR_POWER_LOST: power voltage rise or drop",
+        "SWEEP_STRING",
+        "_pic_write_iic failed!",
+        "PLL read exceeded wait time",
+        "ERROR_SOC_INIT: soc init failed",
+        "fail to read 0:1",
+        "fail to write 0:1"
+    ]
+}

finder.py

@@ -1,31 +1,29 @@
 import paramiko
 import csv
 import re
+import json
 
-# Define credentials for different OS types
-credentials = {
-    "stock": [("miner", "miner"), ("root", "root")],
-    "braiins": [("root", "root")],
-    "luxos": [("root", "root")],
-    "vnish": [("user", "password")]  # Replace with correct credentials
-}
+# Load credentials from a JSON file
+def load_credentials(file_path):
+    with open(file_path, 'r') as file:
+        return json.load(file)
 
-# List of error keywords
-error_keywords = [
-    "ERROR_TEMP_TOO_HIGH",
-    "ERROR_HASHRATE_TOO_LOW",
-    "ERROR_NETWORK_DISCONNECTED",
-    "ERROR_POWER_LOST: power voltage rise or drop",
-    "SWEEP_STRING",
-    "_pic_write_iic failed!",
-    "PLL read exceeded wait time",
-    "ERROR_SOC_INIT: soc init failed",
-    "fail to read 0:1",
-    "fail to write 0:1"
-]
+# Load error keywords from a JSON file
+def load_error_keywords(file_path):
+    with open(file_path, 'r') as file:
+        return json.load(file)['error_keywords']
 
-# Regex pattern for ASIC chip errors
+# Define paths to the configuration files
+CREDENTIALS_FILE = 'credentials.json'
+ERRORS_FILE = 'errors.json'
+
+# Load credentials and error keywords
+credentials = load_credentials(CREDENTIALS_FILE)
+error_keywords = load_error_keywords(ERRORS_FILE)
+
+# Regex patterns for ASIC chip errors and power-off messages
 asic_pattern = re.compile(r"Chain\[(\d+)\]: find (\d+) asic, times \d+")
+power_off_pattern = re.compile(r"Chain (\d+) only find (\d+) asic, will power off hash board (\d+)")
 
 # Function to read IP addresses from a file
 def read_ips(file_path):
@@ -34,16 +32,17 @@ def read_ips(file_path):
     return [ip.strip() for ip in ips]
 
 # Function to check log files for keywords and ASIC errors
-def check_logs(ip, ssh_client):
+def check_logs(ip, ssh_client, worker_id):
     logs = []
-    asic_errors = {}
-    correct_asic_count = {}
+    asic_errors = set()  # Using set to avoid duplicate errors
+    results = []
     try:
         print(f"Checking logs on {ip}")
         stdin, stdout, stderr = ssh_client.exec_command("find /var/log/ -type f")
         log_files = stdout.readlines()
         for log_file in log_files:
             log_file = log_file.strip()
+            print(f"Checking file: {log_file}")  # Debug statement
             # Check if file should be ignored
             if log_file.endswith(('tmp', 'utmp', 'btmp', 'wtmp')):
                 continue
@@ -56,24 +55,29 @@ def check_logs(ip, ssh_client):
             
             stdin, stdout, stderr = ssh_client.exec_command(f"cat {log_file}")
             log_content = stdout.read().decode('utf-8', errors='ignore')
+            print(f"Content of {log_file}: {log_content[:500]}")  # Debug statement to show part of the log content
             for keyword in error_keywords:
                 if keyword in log_content:
                     logs.append((log_file, keyword))
 
-            # Check for ASIC chip errors
+            # Check for ASIC chip errors and power-off messages
             for match in asic_pattern.finditer(log_content):
                 chain, asic_count = match.groups()
                 asic_count = int(asic_count)
-                if chain not in asic_errors:
-                    asic_errors[chain] = []
-                asic_errors[chain].append(asic_count)
+                asic_errors.add((chain, asic_count))
+                print(f"Chain {chain} has {asic_count} chips.")  # Debug statement
                 
-                # Determine the correct ASIC count for each chain
-                if chain not in correct_asic_count and asic_count > 0:
-                    correct_asic_count[chain] = asic_count
+            # Check for power-off messages
+            for match in power_off_pattern.finditer(log_content):
+                chain, found_asic_count, board = match.groups()
+                found_asic_count = int(found_asic_count)
+                chain = int(chain)
+                print(f"Power-off message found: Chain {chain}, ASIC count: {found_asic_count}, Board: {board}")  # Debug statement
+                results.append([worker_id, ip, "ASIC Error", f"Chain {chain} has failed with {found_asic_count} ASICs found and will power off hash board {board}"])
+
     except Exception as e:
         print(f"Error checking logs on {ip}: {e}")
-    return logs, asic_errors, correct_asic_count
+    return logs, asic_errors, results
 
 # Function to get worker ID
 def get_worker_id(ssh_client):
@@ -85,7 +89,6 @@ def get_worker_id(ssh_client):
         match = re.search(r'"user" *: *"[^.]*\.(\w+)"', config_content)
         if match:
             worker_id = match.group(1)
-            print("Got worker ID: ", worker_id)
         else:
             worker_id = "Unknown"
     except Exception as e:
@@ -112,19 +115,18 @@ def main():
                     ssh_client.connect(ip, username=username, password=password)
                     connected = True
                     worker_id = get_worker_id(ssh_client)
-                    logs, asic_errors, correct_asic_count = check_logs(ip, ssh_client)
+                    logs, asic_errors, asic_results = check_logs(ip, ssh_client, worker_id)
+                    results.extend(asic_results)
                     for log in logs:
                         results.append([worker_id, ip, log[0], log[1]])
                     
-                    # Check for ASIC chip errors and add to results
-                    # Maybe think about this differntly. Look for "will power off hashboard" and *then* figure out why the hashboard has been powered off.
-                    for chain, counts in asic_errors.items():
-                        if counts.count(0) >= 3:
-                            results.append([worker_id, ip, "ASIC Error", f"Chain {chain} has {counts.count(0)} failed checks with 0 ASICs found"])
-                        elif chain in correct_asic_count:
-                            expected_count = correct_asic_count[chain]
-                            if any(count != expected_count and count > 0 for count in counts):
-                                results.append([worker_id, ip, "ASIC Discrepancy", f"Chain {chain} has varying ASIC counts: {counts}"])
+                    unique_asic_errors = {}  # Using a dictionary to store chain and failed check count.
+                    for chain, asic_count in asic_errors:
+                        for chain, asic_count in asic_errors:
+                            failed_checks = unique_asic_errors.get(chain, 0) + 1 # array
+                            unique_asic_errors[chain] = failed_checks
+                            if asic_count == 0 and failed_checks == 3:
+                                results.append([worker_id, ip, "ASIC Error", f"Chain {chain} has 3 failed checks with {asic_count} ASICs found"])
                     
                     ssh_client.close()
                     break
@@ -138,6 +140,7 @@ def main():
         writer = csv.writer(file)
         writer.writerow(["Worker ID", "IP Address", "Log File", "Error"])
         writer.writerows(results)
+    print("Writing: ", results)
     print("Done")
 
 if __name__ == "__main__":

readme.md

@@ -1,3 +1,3 @@
 # Antminer error finder
 
-Checks for specific strings in log files of Antminer machines. Currently works with stock firmware. Expand to Braiins & LuxOS.
+Checks for specific strings in log files of Antminer machines. Currently works with stock firmware (and barely at that). Expand to Braiins & LuxOS.

results.csv

@@ -1,15 +0,0 @@
-Worker ID,IP Address,Log File,Error
-mw1012,192.168.1.171,/var/log/2024-03/06/cglog_init_2024-03-06_19-00-57/miner.log,ERROR_SOC_INIT: soc init failed
-mw1012,192.168.1.171,/var/log/2024-03/06/cglog_init_2024-03-06_19-00-57/messages,ERROR_SOC_INIT: soc init failed
-mw1012,192.168.1.171,/var/log/2024-03/06/cglog_init_2024-03-06_18-53-25/miner.log,ERROR_SOC_INIT: soc init failed
-mw1012,192.168.1.171,/var/log/2024-03/06/cglog_init_2024-03-06_18-53-25/messages,ERROR_SOC_INIT: soc init failed
-mw1012,192.168.1.171,/var/log/2024-03/06/cglog_init_2024-03-06_19-07-47/miner.log,ERROR_SOC_INIT: soc init failed
-mw1012,192.168.1.171,/var/log/2024-03/06/cglog_init_2024-03-06_19-07-47/messages,ERROR_SOC_INIT: soc init failed
-mw1012,192.168.1.171,/var/log/2024-03/06/cglog_init_2024-03-06_20-51-43/miner.log,ERROR_SOC_INIT: soc init failed
-mw1012,192.168.1.171,/var/log/2024-03/06/cglog_init_2024-03-06_20-51-43/messages,ERROR_SOC_INIT: soc init failed
-mw1012,192.168.1.171,/var/log/2024-03/06/cglog_init_2024-03-06_18-01-31/miner.log,ERROR_SOC_INIT: soc init failed
-mw1012,192.168.1.171,/var/log/2024-03/06/cglog_init_2024-03-06_18-01-31/messages,ERROR_SOC_INIT: soc init failed
-mw1012,192.168.1.171,/var/log/test,ERROR_POWER_LOST: power voltage rise or drop
-mw1012,192.168.1.171,ASIC Error,Chain 0 has 3 failed checks with 0 ASICs found
-mw1012,192.168.1.171,ASIC Discrepancy,"Chain 1 has varying ASIC counts: [110, 110, 110, 110, 110, 110, 104, 104, 104]"
-mw1012,192.168.1.171,ASIC Discrepancy,"Chain 2 has varying ASIC counts: [110, 110, 110, 110, 110, 110, 114]"