added column to csv, added more regex, added more error keywords

credentials.json

@@ -1,6 +1,6 @@
 {
     "stock": [["miner", "miner"], ["root", "root"]],
     "braiins": [["root", "root"]],
-    "luxos": [["root", "root"]],
-    // "vnish": [["user", "password"]] // apparently vnish's ssh port is closed? I messaged them on telegram asking about it.
+    "luxos": [["root", "root"]]
 }
+

credentials.json.comments

@@ -0,0 +1 @@
+vnish does not have an ssh option. I messaged their developers on telegram and they said it was closed. :(

errors.json

@@ -1,14 +1,16 @@
 {
-    "error_keywords": [
-        "ERROR_TEMP_TOO_HIGH",
-        "ERROR_HASHRATE_TOO_LOW",
-        "ERROR_NETWORK_DISCONNECTED",
-        "ERROR_POWER_LOST: power voltage rise or drop",
-        "SWEEP_STRING",
-        "_pic_write_iic failed!",
-        "PLL read exceeded wait time",
-        "ERROR_SOC_INIT: soc init failed",
-        "fail to read 0:1",
-        "fail to write 0:1"
-    ]
+    "error_keywords": {
+        "ERROR_TEMP_TOO_HIGH": "Temperature Error",
+        "ERROR_NETWORK_DISCONNECTED": "probably doesn't exist",
+        "ERROR_POWER_LOST: power voltage rise or drop": "voltage drop",
+        "_pic_write_iic failed!": "PIC Error",
+        "PLL read exceeded wait time": "PLL Error",
+        "ERROR_SOC_INIT: soc init failed": "SoC failure",
+        "fail to read 0:1": "eeprom",
+        "fail to write 0:1": "eeprom",
+        "bitmain_get_power_status failed": "PSU",
+        "power voltage can not meet the target": "PSU",
+        "reg crc error": "black hole",
+        "ERROR_POWER_LOST: pic check voltage drop": "voltage drop"
+    }
 }

finder.py

@@ -8,7 +8,7 @@ def load_credentials(file_path):
     with open(file_path, 'r') as file:
         return json.load(file)
 
-# Load error keywords from a JSON file
+# Load error keywords and types from a JSON file
 def load_error_keywords(file_path):
     with open(file_path, 'r') as file:
         return json.load(file)['error_keywords']
@@ -24,6 +24,8 @@ error_keywords = load_error_keywords(ERRORS_FILE)
 # Regex patterns for ASIC chip errors and power-off messages
 asic_pattern = re.compile(r"Chain\[(\d+)\]: find (\d+) asic, times \d+")
 power_off_pattern = re.compile(r"Chain (\d+) only find (\d+) asic, will power off hash board (\d+)")
+eeprom_error_pattern = re.compile(r"Data load fail for chain (\d+)\.")
+chip_bin_pattern = re.compile(r"No chip bin, chain = (\d+)")
 
 # Function to read IP addresses from a file
 def read_ips(file_path):
@@ -35,7 +37,7 @@ def read_ips(file_path):
 def check_logs(ip, ssh_client, worker_id):
     logs = []
     asic_errors = set()  # Using set to avoid duplicate errors
-    results = []
+    results = set()  # Using set to avoid duplicate entries
     try:
         print(f"Checking logs on {ip}")
         stdin, stdout, stderr = ssh_client.exec_command("find /var/log/ -type f")
@@ -56,9 +58,9 @@ def check_logs(ip, ssh_client, worker_id):
             stdin, stdout, stderr = ssh_client.exec_command(f"cat {log_file}")
             log_content = stdout.read().decode('utf-8', errors='ignore')
             print(f"Content of {log_file}: {log_content[:500]}")  # Debug statement to show part of the log content
-            for keyword in error_keywords:
+            for keyword, error_type in error_keywords.items():
                 if keyword in log_content:
-                    logs.append((log_file, keyword))
+                    logs.append((log_file, error_type, keyword))
 
             # Check for ASIC chip errors and power-off messages
             for match in asic_pattern.finditer(log_content):
@@ -73,7 +75,19 @@ def check_logs(ip, ssh_client, worker_id):
                 found_asic_count = int(found_asic_count)
                 chain = int(chain)
                 print(f"Power-off message found: Chain {chain}, ASIC count: {found_asic_count}, Board: {board}")  # Debug statement
-                results.append([worker_id, ip, "ASIC Error", f"Chain {chain} has failed with {found_asic_count} ASICs found and will power off hash board {board}"])
+                results.add((worker_id, ip, log_file, "ASIC Error", f"Chain {chain} has failed with {found_asic_count} ASICs found and will power off hash board {board}"))
+
+            # Check for EEPROM errors
+            for match in eeprom_error_pattern.finditer(log_content):
+                chain = match.group(1)
+                print(f"EEPROM error found: Chain {chain}")  # Debug statement
+                results.add((worker_id, ip, log_file, "EEPROM Error", f"Data load fail for chain {chain}"))
+            
+            # Check for chip bin errors
+            for match in chip_bin_pattern.finditer(log_content):
+                chain = match.group(1)
+                print(f"Chip bin error found: Chain {chain}")  # Debug statement
+                results.add((worker_id, ip, log_file, "Chip Bin Error", f"No chip bin for chain {chain}"))
 
     except Exception as e:
         print(f"Error checking logs on {ip}: {e}")
@@ -99,7 +113,7 @@ def get_worker_id(ssh_client):
 # Main function to iterate over IPs and check for errors
 def main():
     ips = read_ips('ips.txt')
-    results = []
+    results = set()  # Using set to avoid duplicate entries
 
     for ip in ips:
         print(f"Processing IP: {ip}")
@@ -116,17 +130,16 @@ def main():
                     connected = True
                     worker_id = get_worker_id(ssh_client)
                     logs, asic_errors, asic_results = check_logs(ip, ssh_client, worker_id)
-                    results.extend(asic_results)
+                    results.update(asic_results)
                     for log in logs:
-                        results.append([worker_id, ip, log[0], log[1]])
+                        results.add((worker_id, ip, log[0], log[1], log[2]))
                     
                     unique_asic_errors = {}  # Using a dictionary to store chain and failed check count.
                     for chain, asic_count in asic_errors:
-                        for chain, asic_count in asic_errors:
-                            failed_checks = unique_asic_errors.get(chain, 0) + 1 # array
-                            unique_asic_errors[chain] = failed_checks
-                            if asic_count == 0 and failed_checks == 3:
-                                results.append([worker_id, ip, "ASIC Error", f"Chain {chain} has 3 failed checks with {asic_count} ASICs found"])
+                        failed_checks = unique_asic_errors.get(chain, 0) + 1
+                        unique_asic_errors[chain] = failed_checks
+                        if asic_count == 0 and failed_checks == 3:
+                            results.add((worker_id, ip, log_file, "ASIC Error", f"Chain {chain} has 3 failed checks with {asic_count} ASICs found"))
                     
                     ssh_client.close()
                     break
@@ -138,9 +151,8 @@ def main():
     print("Writing results to CSV")
     with open('results.csv', 'w', newline='') as file:
         writer = csv.writer(file)
-        writer.writerow(["Worker ID", "IP Address", "Log File", "Error"])
+        writer.writerow(["Worker ID", "IP Address", "Log File", "Error Type", "Error Message"])
         writer.writerows(results)
-    print("Writing: ", results)
     print("Done")
 
 if __name__ == "__main__":

warnings.json

@@ -0,0 +1,5 @@
+{
+    "warning_keywords": {
+        "the ECC used on your system is too weak compared to the one required by the NAND chip": "warning"
+  }
+}